Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Jenn Air wall oven ww2750


jumptrout

Recommended Posts

  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

  • jumptrout

    3

  • RegUS_PatOff

    1

  • tpoindexter

    1

Top Posters In This Topic

Door is locked and can not get it open.

Removed control panel to manually activate latch.

Still can not h

get latch to release.

HELP.

Edited by jumptrout
Link to comment
Share on other sites

I couldn't find a manual for this model but did run across this if it helps:

 

If there is an unlock button try holding it in for 30 seconds, then, see if it'll open.

 

or

 

Try turning the breaker off to the unit for 60 seconds to see if it will reset.

If not, then try to set the self clean, wait 60 seconds and cancel it to see if that will reset the door latch assembly. If nothing resets the door lock, then you just need to manually open the door and replace the door latch assembly.

It's not easy to manually unlock the door.

You'll need to use a coat hanger and pull the latch assembly from RIGHT to LEFT by slipping it down between the door and the oven frame at the top. Force the latch over to the left and open the door, then you can remove the panel in front of the door latch.

Edited by tpoindexter
Link to comment
Share on other sites

I couldn't find a manual for this model but did run across this if it helps:

 

If there is an unlock button try holding it in for 30 seconds, then, see if it'll open.

 

or

 

Try turning the breaker off to the unit for 60 seconds to see if it will reset.

If not, then try to set the self clean, wait 60 seconds and cancel it to see if that will reset the door latch assembly. If nothing resets the door lock, then you just need to manually open the door and replace the door latch assembly.

It's not easy to manually unlock the door.

You'll need to use a coat hanger and pull the latch assembly from RIGHT to LEFT by slipping it down between the door and the oven frame at the top. Force the latch over to the left and open the door, then you can remove the panel in front of the door latch.

Already did all this.

Link to comment
Share on other sites


×
×
  • Create New...