Jump to content
LIMITED TIME OFFER: Use code 10YEARS10 to get 10% off your Appliantology membership. Click here for more ×
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Frigidaire refer...FSC23F7DSB7

certified tech group 51

By certified tech group 51
in Appliance Service Manual Requests Forum

 Share

Recommended Posts

  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • RegUS_PatOff

    1

  • certified tech group 51

    1

  • tpoindexter

    1

Popular Days

Top Posters In This Topic

Popular Days

tpoindexter Senpai

tpoindexter

Posted
Posted (edited)

I've had 2 of these and in both cases it was a leak that had sprungs in the water filter. The water then would squirt through a small hole when water valve opened and get into the area with the board.

I remember thinking after finding the first one what were the chances that the filter could spring a leak in just the right place to shoot water through that little hole. Then damned if I didn't have another last year.

The first 1st took 2 boards cause when I got there they had taken the filter out and just told me they was going to replace it when they got a chance to pick one up. I noticed a very small amount of moisture in the tray with the board but didn't make the connection. Replaced the board and all was good. Got a call back couple of weeks later. They had put the filter back in to make ice, and it killed the new board.

The hole the water was going through was small and up toward the ceiling so it kinda amazed me that it even happen.

Then I had another, so, I suggest you consider the possibility and run some water checking filter for leaks before ya get it going and assume all it well.

Edited by tpoindexter
Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...