Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Isn’t it time to know what you don’t know?

Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

Stay connected with us...

Samurai on Facebook - become a fan today! Sign up for our free newsletter and keep up with all things Appliantology. Subscribe to our YouTube channel for lots of appliance repair tips and help! Follow the Samurai on Twitter and get timely morsels of Appliantological Wisdom! Subscribe to our MST Radio podcast to learn secrets of the trade.

ge profile pdw8200j01ww will not drain

4 posts in this topic

How do I pull the pump off of the above model dishwasher?

Share this post

Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

You have to pull the dishwasher from under the counter and tilt it back to be able to reach everything. Once you get it out you just disconnect the pump from the hose, sump, and 2 mounting screws.

Edited by tpoindexter

Share this post

Link to post
Share on other sites

1) Pull dishwasher out

2) Remove pump from left rear corner.

But if it's not draining what makes you think it's the pump? I'd start a rinse cycle and after it starts sloshing the water about inside push the reset button (same as the start button). After the slosh stops the next thing you'll hear is the drain pump. If you do hear the pump my money rides on the good old junk-in-the-sump. You can check that without pulling the DW.

1) Open door and remove rack.

2) Turn the spray arm backwards while lifting up on it and remove it

3) Remove the plastic cover just behind and to the right of the middle

4) Squeeze the sides of the basket that's down there and pull it out. You might have to squeeze pretty hard.

If there was gunk clogging it run a couple rinse cycles without the strainer but with CLR or Boraxo to clear the sludge from the rest of the system.  

Google the model number and click on 'Images' and there are bunches of blow up pictures for this model.

Share this post

Link to post
Share on other sites