No one seems to say if it is a guess or if this part is actually re-engineered / corrected from original design.
Service Pointer TDC-0017B-B
The hinges and receivers were re-designed and that is why they come as a kit. The new hinges do NOT fit into the old receivers (never tired it the other way around: new receivers with old hinges), so they must be replaced as a set. (However, if you order JUST the hinges with the original part number, they will fit, but you're back to square one if the receivers are also bad).
Test Access = Hold the stop time key at power up OR hold the stop time key for 10 seconds within 6 min of power up.
Test Exit = cancel key, or will self terminate after 16 seconds after last key command (which is a royal pain in the ass if you stop to think about what you are doing).
Bake key = activates Bake relay on the power relay board
Broil key = Broil relay on the power relay board
Convection Bake = Convection Bake relay on the power relay board
Convection Roast = Convection Roast relay on the power relay board
Oven Light = Oven Light relay on the power relay board
Probe Key = Displays probe temp
Timer Keys = displays Factory codes in blue, oven temp in red
Clean Key = shows status of door lock switches and the status of user selectable options.
Stop Time key = activates beeper at 100%, also displays control ID#
Cook Time Key = Displays any fault codes in memory (F0 = no fault codes)
Digital Input keys = show same digit in display
Edited by Chat_in_FL, 29 September 2013 - 04:10 PM.
We, the unwilling, led by the unknowing, are doing the impossible for the ungrateful. We have done so much, for so long, with so little, we are now qualified to do anything with nothing.
The views and opinions expressed in this post are those of the author and do not necessarily reflect or represent the views and opinions held by my employer. All data and information provided is for informational purposes only.