Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

New Appliance Service Manual added: Whirlpool Gas Freestanding Ranges with Direct Spark Ignition (DSI) Control Service Pointer: Spark but no Ignition


Samurai Appliance Repair Man

Recommended Posts

  • Team Samurai

File Name: Whirlpool Gas Freestanding Ranges with Direct Spark Ignition (DSI) Control Service Pointer: Spark but no Ignition

File Submitter: Samurai Appliance Repair Man

File Submitted: 25 Oct 2013

File Category: Appliance Repair Manual Pot Luck Supper



Gas Freestanding Ranges with Direct Spark Ignition
(DSI) Control All Code Dates

Concern:
Under certain circumstances the Bake burner may not ignite. Sparking
is taking place but flame is not established.

Cause:
• Wiring harness may be pinched at a location between the
Bake/Broil igniters and DSI Board.
• DSI Board mounting bracket may be contacting a solder joint on
back of the board.
• Positioning of Igniter and gas burner igniter ports may be out of
adjustment.
• Igniter (Electrode) deterioration

Technical Service Pointer #: W10622771

Release Date: October, 2013



Click here to download this file

  • Like 1
Link to comment
Share on other sites

  • 3 months later...

Another good thing to check is a bad ground wire. You can add a better ground from the burner air flap to the chassis. Would love to download the service pointer

Link to comment
Share on other sites

×
×
  • Create New...