Jump to content
LIMITED TIME OFFER: Use code 10YEARS10 to get 10% off your Appliantology membership. Click here for more ×
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Maytag Range jes8850bab


arrow 1

Recommended Posts

  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

  • arrow 1

    2

  • electro_doc

    2

  • RegUS_PatOff

    1

Top Posters In This Topic

That model number doesn't work for me.  Check it again.  maybe you could take a picture and post it.  Is your stove gas or electric, being you are looking for elements I would think it is gas.  They are usually easy to access so I'm guessing if yours are hard to access you may have the glass top stove with the elements under the glass.  If this is what you have then you should be able to take out screws in the front and I'm not sure but maybe some it the back too and lift the stove top off, disconnect quick connect harness and flip it over to work on it.  This may or may not help as I have no idea what your stove looks like.  good luck

Link to comment
Share on other sites

well I don't know why but I couldn't get anything with that the 1st time.  Now I see however that you do need to remove the top to access the burners.  Should be no problem but now with the file it should be a breeze.  thanks to Reg!

Link to comment
Share on other sites


×
×
  • Create New...