Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Whirlpool gz25fsrxyy2 Ice Maker Problems


ApplianceMagic

Recommended Posts

I can't get the dang thing out.  I see the plastic clip on the side and with it out of the way I still cannot pull the plastic housing (underneath) out.  I even got the ice maker itself out but still can't see what is holding the plastic part it.  A manual would be good.  Thanks.

Link to comment
Share on other sites

  • Team Samurai

This is like the Maytag Iceland models.  This file will show you how to remove it:  http://appliantology.org/files/file/1091-whirlpool-modular-icemakers-in-cubby-in-the-ff-compt-in-french-door-refrigerators/

 

Once you get the harness unclipped and start pulling the icemaker out, the fill spout will catch on the icemaker.  Just pull harder.  The fill spout is rubber and will give.  

  • Like 1
Link to comment
Share on other sites

This is like the Maytag Iceland models.  This file will show you how to remove it:  http://appliantology.org/files/file/1091-whirlpool-modular-icemakers-in-cubby-in-the-ff-compt-in-french-door-refrigerators/

 

Once you get the harness unclipped and start pulling the icemaker out, the fill spout will catch on the icemaker.  Just pull harder.  The fill spout is rubber and will give.  

 

Thanks!

Link to comment
Share on other sites

×
×
  • Create New...