Jump to content
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. 
      I'll be posting a couple more tech sheets before Saturday so be sure to follow this event to keep up with the tech sheets we'll be going through. 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kitchen aid refrigerator KSRB25FHSS04


curjones

Recommended Posts

Want any illustrated manuals you have, found a tech sheet for KSRB25QGss01.

 

Kitchen aid is it made by Frigidaire, will look for answer but if you can confirm thanks.

 

The relay for compressor has been removed, need to test compressor to see if it will run, has run cap.

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • curjones

    3

  • Samurai Appliance Repair Man

    1

The model number must be ksr8 (not B) 25fhss04.  Ive tried to search sit using KSR8 * and got nothing.  Im still trying to find.

Link to comment
Share on other sites

Thanks Samurai,  Got to look for notes on run cap, and start cap, para, and series.  They guted the relay and pct is not there need to see if compressor will run.  I've used 3 and ones on other models but think they have start cap, got some studying and research to do.

Link to comment
Share on other sites

×
×
  • Create New...