Jump to content



Learn appliance repair at the Samurai Tech Academy.  Learn more.  Earn more.


Parts Search
Site Search

FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource!

The world-famous Samurai Appliance Repair Forums


To get started, click here.


Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.

 


Photo

Fisher Paykel DD24D16

dish drawer lid

  • Please log in to reply
3 replies to this topic

#1 prairiestr

prairiestr

    Kohai

  • Chief Appliantologist
  • PipPipPip
  • 271 posts
  • Flavorite Brew:Jack

Posted 07 March 2014 - 04:29 PM

Top drawer lid wont close/open. Diagnostic says;

lid motor current too high during start

lid jammed up or down

The electronic controller has failed

 

OK drawer out, lid actuators seem ok, yokes and lid free to move

Adjusted actuators up, so drawer will close, push start, goes to fail mode F5 LID CURRENT TOO HIGH

 

Secondary action/ replace actuators

Tertiary action/ replace the controller

 

Questions:

1.Parts manual ?

2. What "controller"

 

This is the ONLY fisher paykel I have seen so I'm flying blind here.



Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

#2 J5

J5

    Senpai

  • Sublime Master of Appliantology
  • PipPipPipPip
  • 528 posts
  • Location: non-US or Canada

Posted 08 March 2014 - 01:03 AM

replace lid motors

 

i have replaced a bucket load of lid motors for f5 , never a controller

 

2 drawer ? try the lid motors from the drawer that works in the one that doesnt to 100% confirm

 

i always wind them down a few turns before fitting them as this

1 makes them easier to fit

2 you see them rise up on power up

 

part i am sure is 522085 , just confirm when ordering that the ones as not sure if there

is any difference in the USA products



#3 prairiestr

prairiestr

    Kohai

  • Chief Appliantologist
  • PipPipPip
  • 271 posts
  • Flavorite Brew:Jack

Posted 09 March 2014 - 07:59 PM

Thanks J5,

Now I need a source for parts or parts manual. Any ideas?



#4 Scottthewolf

Scottthewolf

    Senpai

  • Appliantology Fellow
  • PipPipPipPipPip
  • 2,875 posts
  • Location: USA
  • Flavorite Brew:Dunkin Donuts Coffee

Posted 11 March 2014 - 10:18 PM

http://www.genuineap...CFTFk7Aod_lsAUQ
Scott Wolf




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."


The Appliance Guru | Master Samurai Tech

Real Time Analytics