Jump to content
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kenmore refrigerator 106.51183113


herfdog

Recommended Posts

Requesting service manual couldn't find right match in existing manuals. Particularly need ice maker info, this ice maker is different from anything I saw. This one is on the freezer door.

Thanks

Edited by herfdog
Link to comment
Share on other sites

  • Team Samurai

Tough finding manuals for Kenmore-branded stuff.  But this is the 6-cube shorty ice maker.  Part number: AP4558158

Part number: AP4558158

 

Still troubleshoots the same way-- jumper T to H to initiate manual harvest.  

Link to comment
Share on other sites

  • Team Samurai

Domo, Brother Spanner!

Link to comment
Share on other sites

Thanks for the spec sheet. I'm not sure I need an ice maker. I'm wondering about the emitter boards on this unit, not seeing any light with flapper closed or open. As I said before this unit is a little different with everything on the door. How can I test the emitter boards and do you have any info on those results?

Link to comment
Share on other sites

×
×
  • Create New...