Jump to content
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

New Appliance Service Manual added: Whirlpool Maytag Amana - All VMW Top Load Belt Drive Washers - Continuous Test Mode


Samurai Appliance Repair Man

Recommended Posts

  • Team Samurai

Whirlpool Maytag Amana - All VMW Top Load Belt Drive Washers - Continuous Test Mode

View File

Service Bulletin:

At the time of installation, after the washer is first plugged in, the washer may appear to be running a continuous cycle that cannot be stopped, even when you unplug the washer, wait 10 seconds and plug it back in—the washer is in "Continuous Test Mode". To turn this off, perform the following procedure.

Evernote enex ZIP


 

Link to comment
Share on other sites

  • 2 years later...
  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • Samurai Appliance Repair Man

    2

  • MsAnn

    1

Top Posters In This Topic

  • Team Samurai

I added a PDF version of the file.

Link to comment
Share on other sites


×
×
  • Create New...