applianceman1 Posted November 29, 2014 Share Posted November 29, 2014 This is a GE Profile Downdraft Cooktop.I'm looking for the tech sheet or service manualfor this cooktop.Thanks Link to comment Share on other sites More sharing options...
Team Samurai Samurai Appliance Repair Man Posted November 30, 2014 Team Samurai Share Posted November 30, 2014 Walter, that model number is incomplete-- there should be a number after the "N." Link to comment Share on other sites More sharing options...
applianceman1 Posted November 30, 2014 Author Share Posted November 30, 2014 I'll have to check with the customer. He said the right front burner was only heating in the middle. It's a glass top with down draft.If I can't get the number are they all disassembled the same.Thanks Link to comment Share on other sites More sharing options...
olyteddy Posted November 30, 2014 Share Posted November 30, 2014 All the GE glasstops I've worked on have about a dozen Torx screws around the perimeter that allow you to take the glass off. The tech sheet should be inside. Two main possibilities are the burner itself, in which case the burn will be obvious and the infinite control. Pretty straight forward, either way. 1 Link to comment Share on other sites More sharing options...
applianceman1 Posted November 30, 2014 Author Share Posted November 30, 2014 Thanks for the information. I tried to get the tech sheet in thedownloads but there isn't one.Like you said pretty straight forward. Link to comment Share on other sites More sharing options...
applianceman1 Posted December 9, 2014 Author Share Posted December 9, 2014 Yes it was the burner. As it turned out a pretty easy job.Thanks for your help. 1 Link to comment Share on other sites More sharing options...
applianceman97 Posted December 9, 2014 Share Posted December 9, 2014 Great job! Thanks for the update! Link to comment Share on other sites More sharing options...
Recommended Posts