brand new frigidaire diswasher doesn't clean
Posted 13 May 2005 - 09:24 AM
Posted 13 May 2005 - 12:49 PM
Need parts? Call our Parts Department now! 877-803-7957
Posted 13 May 2005 - 01:27 PM
See if the float is raised after the machine fills and starts to wash. If not, you found your problem. These machines only use about 1.7 gallons each fill. If your water level is low, the pump will not keep the system pressurized(it sucks air and loses pressure) and the upper rack will not get clean.
If I was doing the service call, I would enlarge the holes in the flow restriction washer with an icepick or awl. If you take the washer out completely, the valve will make more noise during fill.
Some service guys will not do this, they don't want to risk getting blamed if the machine leaks or overfills.
If you're handy, it's an easy job.
Remove the valve, take note of how things are aligned, take it apart (4 screws) remove the screen, remove the washers, make the holes bigger, put it all back together.
Check for leaks and enjoy.
If you don't get a full charge of water, you get...
1. low wash pressure
2. poor soap performance
3. the heat element will not work as intended, because the water isn't making contact.
4. poor rinsing
5. unhappy customer.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users