Jump to content


Use this Search Box to Find Appliance Repair Help Now
Need help finding your model number?
365-day return policy on all parts purchased here, even electrical parts that have been installed!


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource for DIYers!

The world-famous Samurai Appliance Repair Forums


You can post a question and get repair help for FREE! Click here to get started.


Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.

 


Photo

kelvinator washer aw701g1d


  • Please log in to reply
5 replies to this topic

#1 bkw44

bkw44

    Unsui

  • Grasshoppah
  • Pip
  • 4 posts

Posted 15 May 2005 - 06:02 PM

hello,

my washer leaks water as soon as the tub starts to fill. on top of the pump there is a small spout i'm guessing to keep water from running onto the motor? well good thing cause thats where it's coming from.on the bottom of clamp on the hose from the tub to the pump there is a small amount of rust but i don't see it leaking when i run water.what do you think?

thank you,

brian


Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

#2 Budget Appliance Repair

Budget Appliance Repair

    Sensei

  • Appliantology Fellow
  • PipPipPipPipPip
  • 4,711 posts

Posted 16 May 2005 - 01:17 AM

It sounds from your description, (If your sure it's not the hose leaking), that you will need a new pump.

The pump is very easy to remove, just the two clips to pop off and then lift pump straight up off motor drive shaft.

Look at the bottom of the pump and see if you see the signs of water leakage, I'm sure you will......

Here's were to get the pump if you determine for sure that is the problem, (the pump is not repairable when the seal goes out). CLICK HERE
William Burk (Willie)
Willie's Budget Appliance Repair
Eureka, CA 95501

#3 bkw44

bkw44

    Unsui

  • Grasshoppah
  • Pip
  • 4 posts

Posted 16 May 2005 - 04:13 AM

well, i can't see the other side of the hose so i put some toilet paper around it and ran the water and the tp was still dry. i was thinking it was the pump but wanted a second opinion. thank you for your help. i'll let you know how it goes.

brian


#4 bkw44

bkw44

    Unsui

  • Grasshoppah
  • Pip
  • 4 posts

Posted 16 May 2005 - 09:14 AM

am i missing somthing or do they all come off this hard? i dont want to force it to much and break somthing?

#5 Samurai Appliance Repair Man

Samurai Appliance Repair Man

    Shōgun

  • Master Samurai Tech
  • 29,031 posts
  • Location: USA
  • Flavorite Brew:Sapporo Original Draft Rice Lager

Posted 16 May 2005 - 01:45 PM

You're dealing with rust from a leaking pump. Time for spit and determination. Since you're replacing the pump anyway, destructive removal is an appproved technique here. Large screwdrivers ffor small crowbars work well. And, don't forget everyone's favorite tool: the hammer.

#6 bkw44

bkw44

    Unsui

  • Grasshoppah
  • Pip
  • 4 posts

Posted 16 May 2005 - 02:03 PM

thank you master.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."

The Appliance Guru | AppliancePartsResource.com | Samurai's Blog

Real Time Analytics