Jump to content
LIMITED TIME OFFER: Use code 10YEARS10 to get 10% off your Appliantology membership. Click here for more ×
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Gurgling sound from furnace exhaust pipe


Elisabet

Recommended Posts

Last week I was visiting my mom, and as I was sitting in the kitchen with my coffee one morning I heard a gurgling sound coming from the "basement" - really a ground level room a few steps down from the kitchen. It was loud, in fact at first I thought the washer was running.

Upon investigating I discovered that the loud gurgling sound was actually coming from a pvc pipe that attached to the furnace (gas powered). It comes out of the funace, goes up a few feet, then runs horizontal a few feet then continues vertical through the ceiling. I'm pretty sure it lines up with the furnace chimney (which does have a cap) that I can see poking out of the second story roof on that part of the house. It's a big old house, with a big old furnace, A/C and a mix of many decades worth of ducts and equipment. I think the current furnace is about ten years old and the pvc was not there when I was kid; guess they used metal back then.

I'm guessing that the source of most of the water is condensate from the exhaust, not rain, since there is a rain cap on the chimney, and it sounds like there is quite a bit of water in the pipe. The horizontal run of that pipe is tied to the ceiling but there is some play there, and though I didn't check it with a level due to the water collecting in that spot it does seem that there is a slight dip to that second elbow.

It might be possible to push that elbow up a tiny bit and run the water back, but dumping water into the innards of the furnace didn't seem like a good idea so I left it alone. There is no valve to drain the water, either, everything is glued up.

Yes, the gurgling sound happens if and only if the heater is running.

question:

Is water in the exhaust pipe a problem? Or just a noisy nuisance? The exhaust does seem to be gurgling out in spite of the water. Is this normal behavior for a furnace?

Thank you for the help, oh wise ones...

Link to comment
Share on other sites

  • Replies 4
  • Created
  • Last Reply

Look around where the pipe exits the furnace, you should see a small tube that either goes into a drain or a sump hole.  This is the condensate drain line that allows water to drain from the exhaust.  With the furnace running you should see a small amount of water coming out.  If your furnace is a high efficiency model than there most certainly should be a drain line below the exhaust.  If water gets back into the furnace it will cause corrosion and premature breakdown.  Have your furnace inspected if you are not sure what to look for.

Link to comment
Share on other sites

Unfortunately I'm several hundred miles away from the problem now - but I think the PVC pipe was a few inches in diameter. Not as big as e.g. a sewer pipe, but more than an inch.

There is a condensate drain line - at least I assume that is what it is - 1" pvc but I couldn't see exactly where it went; under the stairs to the crawl space under the house. So no idea if there was anything draining from it while the furnace was running. It was not connected to the exhaust pipe that I could see; came out the other side of the unit. I assumed it was for the A/C. (Never noticed our drain line producing anything when the furnace is running, but it's a very different set up).

Sorry to be so vague.

Is it ok to have the exhaust pipe take a horizontal run like that? And I take it that getting that much condensation means there is a problem with the furnace or the installation. Sounds like my mom will have to have a service call.

Thank you

Link to comment
Share on other sites

that line probably needs to be inspected to see if its draining properly

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...