Jump to content
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Whirlpool Washer LA9480XWN2 Help please!


elkheimer

Recommended Posts

OK, a little background ...

My old Whirlpool was shaking during the spin cycle, so I replaced the 3 little wear/bearing pads and the counterbalance spring.

But, when I put it all back together and my wife put clothes in it, the machine fills up with water and then nothing.  I've checked and jumpered out the lid switch - and the timer times out.  But the machine neither agitates or spins or drains.  Any ideas?  I must have done something stupid, but can't seem to figure it out!

Thanks much!

Link to comment
Share on other sites

  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

  • elkheimer

    3

  • lvasquez11

    1

  • Hiroshi

    1

Well, I wiggled the connector at the motor and away it went.  Is there a way to fix that connector or am i going to have to buy the harness?

 

Link to comment
Share on other sites

You could try using a zip tie - add silicone on connector n let it dry 

Link to comment
Share on other sites

Look closely at the plastic connector... if there is a burn/overheating mark developing, you should get a new terminal and hard-wire the neutral. 

Link to comment
Share on other sites

  • 2 weeks later...

Thanks guys - I appreciate the help.  The old Whirlpool lives to see another day!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...