Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Whirlpool dryer WED9400SW0 - installing electronics control board


BB430

Recommended Posts

Installing new board (part W10110641), but embarrassingly, I didn't take a photo of the wire setup before it was removed.  I got all the wires back in, and I don't think there was really any other way to do it.  But I'd like to confirm that if possible before firing it up.  Anyone happen to know where I can find a photo of the wires online or something?

Link to comment
Share on other sites

  • Replies 10
  • Created
  • Last Reply

Top Posters In This Topic

  • BB430

    5

  • sh2sh2

    3

  • pmjallow

    2

  • Samurai Appliance Repair Man

    1

Take a picture and I can tell if it's right, but they should only go in one way

Link to comment
Share on other sites

  • Team Samurai
8 minutes ago, sh2sh2 said:

Looks good!

2016-02-10%2002.01.34_zpstj1jcmlv.jpg

Link to comment
Share on other sites

So, I can just put all the covers back on and fire it up?  I'm so scared of doing something dumb and blowing out a $180 board...:wacko:  Any need to recheck the thermal fuse, thermistor, thermal cutoff etc that I also replaced?

Link to comment
Share on other sites

From what I can see and what u describe you are ready to go

Link to comment
Share on other sites

It's working!!!  On Air Only, the heating element didn't light up, and then on Medium heat, it lit up and then I heard a click and it went off, then a few moments later, it came back on. I assume that's the thermal cutoff doing it's job correctly.  Thank you so much for your input!

Link to comment
Share on other sites

  • 3 years later...

I install a new board on this model with error F01 now I am getting F70 Communication error, any suggestions 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...