Fisher Paykel Dish Drawers dd603 Top drawer Always ends up with water in it.
Posted 26 June 2006 - 01:49 PM
It used to be fine and about 3 weeks ago after two+ years of service this started happening.
The three dishwashers all drain into the sinks drianage system and I see the FisherPaykel has a Y type connector to the drain.
Could some drain valve on my upper drawer be stuck open allowing overflow from the others to seep in?
Posted 26 June 2006 - 06:19 PM
Posted 26 June 2006 - 07:08 PM
Thanks a ton!
What does that valve do?
Posted 30 October 2006 - 05:02 AM
Posted 30 October 2006 - 10:57 AM
After I got the part (a little flapper valve - rubber circle) and looked at the instructions on where to place it I disconnected the drain hose from the top drawer.
When the hose was diconnected and I removed the valve some piece of pebble or rice or something rather hard and small was stuck on the edge of the valve.
I rinsed it off and put it back and all has been well ever since!!!
Posted 31 October 2006 - 07:11 PM
Posted 31 October 2006 - 07:25 PM
It could just be some piece of fluff stuck to the flapper.
it takes very little time to pop off the hose, check the valve and put it back.
save yourself the money!
Posted 01 November 2006 - 05:34 PM
Posted 04 May 2008 - 08:09 AM
Need parts? Call our Parts Department now! 877-803-7957
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users