Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Learn appliance repair at online the Master Samurai Tech Academy.  Learn more.  Earn more.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

rbravo46

Fixing my AC Split syst.

5 posts in this topic

My AC 3 ton split syst. is not cooling right. The low presure side is 70 psi. & high

presure side is 250 psi. with 88 F. ambient temp. The Compresor is consuming

8 A. instead 13 A. The return pipe on Compresor is swething & the Evaporator is

working just at 25% of his capacity.    I have replaced the Blower but still no change.

What could be causing this problem ?    Thank for any help,:huh:

 

 

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

Low side high, high side low, not pulling rated amps. Inefficient compressor.

Share this post


Link to post
Share on other sites

have you cleaned the outside unit?

 

Share this post


Link to post
Share on other sites

[user=10647]rbravo46[/user] wrote:

My AC 3 ton split syst. is not cooling right. The low presure side is 70 psi. & high

presure side is 250 psi. with 88 F. ambient temp. The Compresor is consuming

8 A. instead 13 A. The return pipe on Compresor is swething & the Evaporator is

working just at 25% of his capacity. I have replaced the Blower but still no change.

What could be causing this problem ? Thank for any help,:huh:

Reply: That's a lot of difference in current. Like it's not doing much work at all. Take the actual temperature of the return line at the condenser input with a service thermometer and compare it to the guages pressure/temp readings. The difference should be less than 10 degrees and five is prefereable. If not - add freon.

Share this post


Link to post
Share on other sites

why did you replace the blower? If you replaced the blower did you replace it with the same speed blower or opt for more speed?

 if you did you messed up

 

Share this post


Link to post
Share on other sites