Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

GE Dehumidifier


kramelop

Recommended Posts

My father brought me a GE AHG40LFM1dehumidifier, the other day...says the compressor runs, but the air circulating fan no longer turns on. I pulled the beast apart and the cicuit board seems to check out.

The small motor is a two speed, single motor assembly, mtr040h / dha 115v 60hz - 1380 - 1280rpm, part #4681A20040H or GE wk94x10007. Volt meter shows voltage (118 v) on both of the hi/ low pins appropriately when the switch is activated and toggled between hi and low on the board .

I have observed the compressor starting as he described. I have closed the tank in-place / removed switch and observed that it is working as well (taped it closed for testing). I'm thinking that the little electric motor has gone bad, as I find no reason for the fan not to run. I guess I am asking if I have missed anything. Are there any other reasons for this fan not to run that I have missed? Any help is appreciated, thxs in advance, Mark

Link to comment
Share on other sites

  • Replies 1
  • Created
  • Last Reply

Try giving the fan  a little nudge when you start it. If it tries to run, you probably have a bad motor.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...