Whirlpool Tall Tub
Posted 08 April 2005 - 03:27 PM
OK, on with my problem. I have taken the wash pump assembly out of the dishwasher. Went step by step from the service info. found underneath the dishwasher. However, when trying to remove the motor sub-assembly, I'm having problems. I removed the 3/8" bolt that holds the heat shield and motor in place. It says to then turn the pump counterclockwise and pull motor from plastic housing. I've pulled and pulled but it is stuck and I was afraid of screwing something up, so I stopped.
Anyone have any suggestions? Thanks for your help.
Posted 08 April 2005 - 03:50 PM
Posted 09 April 2005 - 06:04 AM
Posted 09 April 2005 - 06:31 AM
Posted 09 April 2005 - 08:39 AM
There's nothing worse than some little annoying problem like this that takes an act of Congress to figure out. LOL!
By the way, this dishwasher is only 11 months old.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users