Jump to content


Use this Search Box to Find Appliance Repair Help Now
Need help finding your model number?
365-day return policy on all parts purchased here, even electrical parts that have been installed!


FAQs | Store | Memberships | Repair Videos | Newsletter | Beer Fund | Contact


Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource for DIYers!

The world-famous Samurai Appliance Repair Forums


You can post a question and get repair help for FREE! Click here to get started.


Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.

 


mark mac

Member Since 10 Mar 2008
Offline Last Active Apr 12 2014 06:49 PM

#286541 LDG8706AAE Maytag Dryer no heat - where to start?

Posted by mark mac on 02 March 2014 - 12:47 PM

You have a bad ignitor if no continuity




#286539 WPRB8050D1WW MOTOR HUMS / GETS HOT

Posted by mark mac on 02 March 2014 - 12:40 PM

Sounds like a motor gone bad




#280629 Good War Story

Posted by mark mac on 09 January 2014 - 03:22 PM

The same with washers wife thinks I'm nuts


#278608 Recommendations direct drive washer

Posted by mark mac on 22 December 2013 - 12:30 PM

vmw are good as long as you don't use it on a daily basis




#278607 Kenmore Softener 625.348491 resin replacement

Posted by mark mac on 22 December 2013 - 12:26 PM

Not cost effective to change resin bed




#277632 What the crap is wrong with my Whirlpool Electric Dryer?

Posted by mark mac on 15 December 2013 - 10:18 AM

check 240 across terminals first




#275742 Kenmore oasis dryer f2

Posted by mark mac on 28 November 2013 - 04:17 PM

did u unplug it from the wall before u put board in, if not unplug it and u should be good to go, seen this plenty of times resets board




#272259 kenmore elite oasis 110.27087604 ld error

Posted by mark mac on 26 October 2013 - 11:21 AM

ld is a long drain look for something between tub and basket over sump




#260310 Cabrio Washer Drain Pump

Posted by mark mac on 07 July 2013 - 09:30 PM

they go between tub and pump, if u talkin about cardboard shield, I don't use them I throw them away,waste of time




#260179 Whirlpool Duet Steam Washer - WFW9600TW0 - F35 Error Also getting SUDS error...

Posted by mark mac on 06 July 2013 - 12:36 PM

Hate to tell u if pressure switch doesn't correct problem will need a new ccu, think that's on back order too




#260128 Overheating problem with 3 yr. old whirlpool Cabrio electric dryer

Posted by mark mac on 05 July 2013 - 11:39 PM

relay in control board sticking,need a new control board




#259430 Kenmore FL Washer 110.46757801

Posted by mark mac on 29 June 2013 - 06:18 AM

problem with the main ccu, boards are terrible been there before, should be good to go after replacing ccu




#258252 Kenmore FL Washer 110.46757801

Posted by mark mac on 16 June 2013 - 07:32 AM

There has been a rash of bad ccu for this machine. does the suds error come on as soon as the door locks, if theres a delay a minute or two its the pressure switch




#258244 Kenmore FL Washer 110.46757801

Posted by mark mac on 15 June 2013 - 08:24 PM

Take  pressure switch hose off see if it starts  if u still  having same problem need a ccu




#258215 FL drum not moving

Posted by mark mac on 14 June 2013 - 08:39 PM

Don't need to put  counterweight in makes a nice boat anchor







FAQs | Store | Memberships | Repair Videos | Newsletter | Beer Fund | Contact


Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."

The Appliance Guru | AppliancePartsResource.com | Samurai's Blog

Real Time Analytics