Jump to content

Learn appliance repair at the Samurai Tech Academy.  Learn more.  Earn more.

Parts Search
Site Search

FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact

Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource!

The world-famous Samurai Appliance Repair Forums

To get started, click here.

Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.



Member Since 09 Mar 2009
Offline Last Active Dec 20 2014 05:47 PM

Topics I've Started

Samsung Dishwasher DW80H9930US/AA

23 September 2014 - 04:55 PM

The door on this dishwasher comes open during the cycle. When the door opens, it sometimes continues washing and has to be cut off at the breaker. A new door switch was installed three weeks ago. Any ideas on what would cause this to happen; especially, to keep running with the door open?

Whirlpool Washer Mod. #WFW9500TW01

20 August 2014 - 12:12 PM

This unit is displaying a F-35 error code when in the wash cycle. If I put it in a rinse/spin cycle or a spin only cycle, it displays SUD error. I have disassembled the steam heater and have found no problems. If I press start and deep clean simultaneously to test the steam circuit, it displays YES indicating the steam circuit is fine. The machine will start to fill, but then stops and displays the F-35 code.  I replaced the pressure sensor on this machine about a year ago when it was displaying SUD and it has worked fine until now, Any suggestions?

Whirlpool Microwave MH9180XLT0

05 August 2014 - 06:42 PM

This unit comes on when time is chosen, but it stops within seconds of coming on, pauses, and then repeats the process until it eventually reaches the end of the time selected. It heats properly, but takes much longer to complete the cycle. Any suggestions as to what could be causing the power interruptions? 

Samsung Washer WA50F9A7DSP/A2 0000

22 July 2014 - 02:22 PM

The display is not lighting properly. If it is supposed to read 80, it looks like 30 or maybe oO. Also the alarm goes off randomly, indicating the cycle is over when it is not. Otherwise the unit operates normally. I think I need part #DC92-01311C, but I'm not sure if that inludes the LED. Is that the correct part number or do I need a different part/s?

Samsung Washer WF393BTPARA/A2

01 June 2014 - 06:11 PM

This washer has a new motor/hall sensor and a new main pcb but still displays 3E error code and shuts down. Does anyone know what else could cause this error?

FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact

Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."

The Appliance Guru | Master Samurai Tech

Real Time Analytics