Jump to content



Learn appliance repair at the Samurai Tech Academy.  Learn more.  Earn more.


Parts Search
Site Search

FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource!

The world-famous Samurai Appliance Repair Forums


To get started, click here.


Already a member of Appliantology? Just sign in with your username and password in the upper right-hand corner of the screen.

 


arrow 1

Member Since 05 Sep 2010
Offline Last Active May 19 2015 07:07 AM

Topics I've Started

whirlpool Model ED5FHAXSQ01 Indoor ice container

25 July 2014 - 09:36 AM

Does anyone have a good diagram or video on how the rotary blades assemble on this ice container?  Whirlpool  part #  2320332. The assembly in the part look up for it is evidently incorrect?


Maytag MFI2067AES code and auger issue

30 April 2014 - 08:37 AM

I replaced the main board in this unit. It had the constant blinking on dispenser and no ice production. When I tried to recode the new board with code 0202, it would not accept the new code. I tried probably 15 times. In frustration I tried putting the code in placing the digits 0202 in reverse order right to left and it accepted them and came on, correcting the problem.  About three days later the customer called me and said the auger runs continuously, pushing ice into floor!! I replaced the main board again ( Had to enter the code in reverse again) and problem went away.   Now about a week later, the auger is running continuously again!!   Has anyone had this happen before as to the reverse code and auger running continuosly?


f24 error 110.47512602

24 August 2013 - 06:23 AM


unit would run about 2 minutes shut off flash f24. No other errors found in diagnostics. tested sensor, a little off, so replaced. now when turn unit on it immediately goes to f24? what order of testing is recommended from here? I have read a lot of topics on this but do not find good conclusions. Just a bit confused need a little direction. Thanks

Whirlpool cabrio suspension rods wtw6600sw1

26 July 2013 - 06:53 AM

I have pulled tub on unit basket floats fine, nothing in between tubs. It seems post I have read on this lead to suspension rods. Has whirlpool improved the rods? Any new info on this? Unit displays ul and ol codes. I leveled unit and sometimes it would spin correctly longer but always goes ul at some point. Sits on concrete floor. Shakes violently. 


washer maytag mtw5840two

09 July 2013 - 05:31 AM

My mother's maytag  is making a loud noise in agitate.-I replaced coupling thinking it was wearing. No help . anyone had this problem on a call? Well yeah noises on a call!! duh!! it is definitely a noisy transmission area sound. 



FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."


The Appliance Guru | Master Samurai Tech

Real Time Analytics