Jump to content



Learn appliance repair at the Samurai Tech Academy.  Learn more.  Earn more.


Parts Search
Site Search

FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource!

The world-famous Samurai Appliance Repair Forums


To get started, click here.


Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.

 


appliancesos

Member Since 14 Mar 2012
Offline Last Active Aug 08 2012 04:18 AM

Topics I've Started

Kenmore/Whirlpool dishwasher keeps coming back

02 August 2012 - 09:58 PM

I've been working on a Kenmore/Whirlpool dishwasher (Mod. # 665.13842K603) that was completely dead. Power (both hot and neutral) were good to the dishwasher. Door switches checked out fine as did the thermal fuse. The heater circuit also was good. Having checked all of the above, I ordered a Control Board which proved to NOT be the problem. I then ordered the touchpad and console and upon installing it. the dishwasher finally did work. This was about three weeks ago. However, today I received a call from the customer saying that the dishwasher was again completely dead. Any ideas/suggestions as to what might be causing this?

Thanks.

Inglis Citation Dryer Model # IE87000. Runs for a few minutes, throws heat, then quits.

16 March 2012 - 12:44 PM

Inglis Citation dryer Model # IE87000 -about 15 years old.
The dryer starts up fine, runs for a few minutes and then shuts off. It throws heat and the vent seems to be unobstructed. Soon after it quits, it can be started again, although, it seems to quit more quickly each time. Any help would be greatly appreciated.

Frigidaire Front load Washer Model No FTF2140FS Washer has wash, rinse and spin lights...

14 March 2012 - 03:49 PM

Frigidaire Front load Washer Model No FTF2140FS Washer has the wash, rinse and spin lights blinking and won't complete it's cycle. Where can I find what this error code is referring to?

Kenmore Range C970-648391 Giving F11 error code and has quit working

14 March 2012 - 02:52 PM

It was unplugged and let sit for a while. When plugged back in, it worked long enough to cook supper but has quit working again.


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."


The Appliance Guru | Master Samurai Tech

Real Time Analytics