Jump to content

Learn appliance repair at the Samurai Tech Academy.  Learn more.  Earn more.

Parts Search
Site Search

FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact

Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource!

The world-famous Samurai Appliance Repair Forums

To get started, click here.

Already a member of Appliantology? Just sign in with your username and password in the upper right-hand corner of the screen.



Member Since 11 Apr 2013
Offline Last Active Jun 15 2015 11:48 AM

Topics I've Started

Revisit WTW57ESVW1

13 June 2015 - 11:01 AM

we all know the ATC Switch causes it not to fill, but the issue is i have put 2 in this unit and they have both failed, does anyone actually know what might be causing them to fail?

Whirlpool "Commercial" coin-op

09 January 2014 - 07:48 PM

I cant really call this commercial, the only thing changed is the motor pulley is metal not plastic. anyway i figure since the controls are mostly the same as the mvwc's  and all related machines, maybe someone has seen this before. after a power outage 4 of these machines have all the status lights on. not blinking either. i can get them into the diagnostic and run the test cycles and calibration but in 2 hours they turn all the lights on again and do not run at all. these are brand new(1 week old), anybody got anything besides changing the control board?

sorry model is CAE2743BQ0

bosch oven HBN5650UC

27 June 2013 - 10:04 AM

really need a wiring diagram for this oven if anyone could help. the problem is that it seems the cooling fan doesnt run long enough and i dont know where the thermostat is for the cutoff or if it is built into the main control. after the fan shuts off the outer part of the doors get very hot (around 130F). any help would be great.

W10317689 Conversion Kit

25 May 2013 - 01:19 PM

first post but i do need help with this, i am a service tech here in odessa, tx for 8 years so i do know my way around most stuff. my problem is a cust dropped off a dryer for shop service and wants us to be sure it was converted to lp correctly, ive looked everywhere for the instruction sheet to said conversion kit and cannot find it so i do not know what size orifice goes into the burner, any know the size? a 55 is in there now.

FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact

Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."

The Appliance Guru | Master Samurai Tech

Real Time Analytics