Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


Appliance Repair Tech Tips

A blog by Son of Samurai in General

  • entries
    220
  • comments
    728
  • views
    149,944

Watch Out for this LG Control Board Booby Trap

Son of Samurai

Entry posted by Son of Samurai

5,111 views

 Share

@LearningTech dropped a great tip in The Dojo a little while back: not all LG control boards can be updated after a universal compressor is installed. If you're planning on doing sealed system work on these machines, you're going to want to check the list below to see if your model's PCB can be updated. Otherwise, you might be in for a nasty surprise.

92E3BD8A-3237-40E3-9409-F3C540D491F7.thumb.jpeg.248932c335d34f537347f87e9317eb56.jpeg

LearningTech also provided a handy image showing where you can find a PCB's manufacturing date:

43E225D6-FD7D-4DF0-ACAB-609CA837E848.thumb.jpeg.3fa6ff82d225b840585a01ab5b3ece1f.jpeg

Want to be in on cool tech tips like this? Click here to become a premium tech member today and join the Appliantology Brethren.

  • Like 6
  • Thanks 1
 Share

3 Comments

Recommended Comments

Slav

Great info!

Just to note that the sticker can be anywhere on the PCB board.

PCB sticker.jpg

  • Like 3
  • Thanks 1
Link to comment
Jonathan Ayala

Jonathan Ayala

Posted

so what would happen with the system after you try the update? i have one where i was dealing with a restriction but i mean i doubt that would have anything to do with the software right?

Link to comment
Slav
3 hours ago, Jonathan Ayala said:

dealing with a restriction but i mean i doubt that would have anything to do with the software right?

The software update needed only when you replace the compressor with the new Universal Linear compressor. The update of the motherboard (PCB) supposed to change how the new compressor runs, and make it last longer than the previous version on the LInear Compressor. 

Link to comment
×
×
  • Create New...