Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Isn’t it time to know what you don’t know?

Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

Stay connected with us...

Samurai on Facebook - become a fan today! Sign up for our free newsletter and keep up with all things Appliantology. Subscribe to our YouTube channel for lots of appliance repair tips and help! Follow the Samurai on Twitter and get timely morsels of Appliantological Wisdom! Subscribe to our MST Radio podcast to learn secrets of the trade.

Samurai Appliance Repair Man's Blog

  • entries
    786
  • comments
    864
  • views
    2,385,800

Replacing the Recirculation Hose in a Whirlpool Calypso Washer

Samurai Appliance Repair Man

1,186 views

If you need to replace the recirculation hose (recirculates water inside the tub) in a Whirlpool Coll-apso washer, you'll be relieved to know that you don't have to remove the inner basket to do so.

This page from the service manual shows where the location of the recirc hose and explains its function:

http://appliantology.org/files/file/492-recirculation-and-drain-in-a-whirlpool-calypso-washer/

And Chief Master Appliantologist DADoESTX explains the technique:

The basket *does not* need to be removed. Raise the top, take off the tub ring. Release the tab on top of the recirc tube where it anchors to a slot at top of the outer tub, and pull the tube straight upwards to remove it. Press the replacement tube down into place on the connector nipple/nubbie at bottom of the tub, anchor the tab. Reassemble the tub ring and machine top.

Here's the part link to the replacement recirc hose ==> http://bit.ly/UfJxEu

Source: K/M 110.25066500 hose replacement