Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

Stay connected with us...

Subscribe to our YouTube channel for lots of appliance repair tips and help! Subscribe to our MST Radio podcast to learn secrets of the trade. Sign up for our free newsletter and keep up with all things Appliantology.
  • Announcements

    • Samurai Appliance Repair Man

      Webinar Recordings Index Page   03/02/2018

      On-demand appliance repair training videos for Professional Appliantologist members Over 30 hours (and growing!) of original, high quality appliance training webinars developed and given by yours truly are at your fingertips, on topics you won't find anywhere else. Fill in those knowledge gaps, strengthen those areas of uncertainty, and boost your skills. Watch on mobile or desktop at your convenience whenever, wherever.  Ultra Short Primer on Basic Electricity, Circuits, Ohm's Law, and Schematic Reading (Length: 1:04:48) Basic Refrigerator Troubleshooting (Length: 1:10:45) Schematic Reading Workshop, 10/2015 (Length 1:19:08) Troubleshooting Strategies for Computer-Controlled Appliances (Length: 48:34) Semiconductors and PN Junctions (Length: 1:04:37) Appliance Temperature Sensing Devices & Technology (Length: 1:27:33) Voltage Measurements, Meters, Ghost Voltages, and Triac-controlled Neutrals (Length: 1:29:32) Troubleshooting with Tech Sheets, Part 1, 4/2016 (Length: 1:09:26) Troubleshooting with Tech Sheets, Part 2, 4/2016 (Length: 1:21:11) Tech Sheet Review, 4/9/2016: Bosch Speed Cooker, Amana Refrigerator, GE Glass Cooktop Range (Length: 1:22:58) Pulse Width Modulated (PWM) Switches used in Samsung Switched Mode Power Supplies (SMPS) (Length: 27:07) PWM Computer Cooling Fan in a Whirlpool Refrigerator (Length: 14:53) Understanding AC Split-phase Household Power Supplies (Length: 52:41) Troubleshooting a Samsung Electric Dryer without Disassembly using Live Tests and the Schematic (Length: 22:47) Troubleshooting a Bosch Dishwasher No-Heat Problem using the Schematic and Live Tests (Length: 15:38) Linear Motors and Linear Compressors (Length: 55:54) Bi-directional PSC Drive Motor Systems in Whirlpool VM Washers (Length: 56:52) Appliance Service Call Structure and Troubleshooting Strategies (Length: 1:00:16) The Ten Step Troubleshooting Tango and Workshop Exercises (Length: 1:35:39) Troubleshooting Ten-Step Tango Advanced Workshop (Length: 1:32:06) Ten-Step Tango Troubleshooting Workshop: Refrigerators (Length: 1:35:57) Whirlpool Duet Washer Schematic Analysis & Whirlpool Dryer Moisture Sensor System (Length: 1:03:04) Neutral Vs. Ground, Inverter Microwave, Digital Communications, Loading Down in DC loads, and more! (Length: 1:14:45) Gas Oven Service Call After a Parts Changing Monkey (Length: 36:04) AFCI and GFCI Circuit Protection Technology (Length: 41:26) Troubleshooting Samsung Refrigerators and more (Length: 1:29:58) 3-way Valves and Dual Evaporator Refrigerators (Length: 1:15:45) Split-Phase Compressors and PTC Start Devices (Length: 1:11:57) Gas Dryer Ignition Systems (Length: 53:50) Refrigerator Sealed System Thermodynamics, Part 1 (Length: 43:07) Refrigerator Sealed System Thermodynamics, Part 2 (Length: 1:09:09) Refrigerator Sealed System Thermodynamics, Part 3 (Length: 1:11:56) Refrigerator Sealed System Thermodynamics, Part 4 (Length: 37:45) Refrigerator Sealed System Thermodynamics, Part 5 (Length: 16:35) Appliantology Peer Group web meeting, Feb 25, 2018 (Length: 1:47:30) Appliantology March 2018 Peer Group Meeting (Length: 1:59:58) To access these webinars and all the other info-goodies here at Appliantology, become a Professional Appliantologist today. If you need cost-effective, time-flexible, state-of-the-art appliance technical training, check out the Master Samurai Tech Academy.
    • Son of Samurai

      [Webinar] Appliantology Peer Group   04/24/2018

      Bring something you'd like to share with your brethren in the craft: it could be photos, a tech tip, new insights gleaned from recent training -- anything having to do with the business or technical sides of the appliance repair trade. If you've got something to show, we'll let you share your screen and give you the opportunity to teach us all something new. And of course, Team Samurai will be there to answer any questions you might have about how to use Appliantology.  

Blogs

Featured Entries

  • Samurai Appliance Repair Man

    The Master Samurai Tech Alumni Program

    By Samurai Appliance Repair Man

    Training at the Master Samurai Tech Academy is already a killer deal: comprehensive, state-of-the-art training that’s online and on-demand at tuition low enough that anyone can afford it. Well now we’re kicking it up to 11 with the Master Samurai Tech Alumni program. If you have been certified* in the Fundamentals course at the Master Samurai Tech Academy or at the Mr. Appliance Academy (Bundle 1 only), you can get full tech access to our tech support site, Appliantology.org, with no annual fee. Yes, as in FREE. You heard that right. You would be a Master Samurai Tech Alumnus at Appliantology with the same level of access and all the benefits of a Professional Appliantologist member (read all the benefits of PA membership here). That’s a $197/year value-- FREE! What’s the catch? No catch but there is a small difference between PA and MST Alumnus membership. PA members can continue to renew their membership at the annual rate and can download and request all the manuals they need regardless of how much or how little they participate in the forums. The MST Alumnus membership is also annual but instead of paying with money, you “pay” with participation in the forums. Each year when your membership comes up for renewal, you need about a 2:1 post to download ratio to renew [UPDATED]. That means that as a general guideline, you need to have made three posts for every download. This is super easy to do and active Appliantology members are already far exceeding this ratio without even trying. The idea here is not to place a burden (because it’s not)-- it’s to discourage people from getting the MST Alumnus membership and simply downloading manuals without interacting with the other members. This really is a killer deal and a special perk for certified Fundamentals graduates! Why are we offering such a great deal? Simple: We want to encourage more techs to successfully complete the Fundamentals course and get certified. This helps them be better techs and helps the trade in general. Certified Fundamentals grads tend to be top tier techs who bring interesting questions and good problem solving insight to the forums. They are skilled techs and potentially valuable content contributors. This deal is retroactive meaning that if you’re already a certified graduate of the Fundamentals course, you are eligible for this deal. If you’re already a PA member and a certified Fundamentals grad, we can move you to the MST Alumnus deal. So how do you get started on this gravy train? Easy: just fill out this short form, we’ll review it and set up your MST Alumnus account here at Appliantology mo’scratchie (that’s Samurai-speak for “quickly”).   * Certified means that you met all currently required quiz and exam score requirements for the course; see this page for details.
    • 2 comments
    • 1,063 views
  • Samurai Appliance Repair Man

    The Facebook Zuck n' Jive

    By Samurai Appliance Repair Man

    Unless you’ve been living under a washing machine all this time, you’ve undoubtedly heard the kerfuffle where Facebook was recently caught selling the personal information of over 50 million people to a marketing firm. I'm not surprised-- saw this coming a long time ago. So did Facebook Dear Leader and CEO, Mark "The Zuck" Zuckerberg. Here's an exchange between The Zuck and a friend shortly after founding Facebook: [Source: https://www.zerohedge.com/news/2018-03-25/dumb-f-ks-julian-assange-reminds-us-what-mark-zuckerberg-thinks-facebook-users ] Hello? Is this thing on? And, not to say I told you so but… I TOLD YOU SO! Yep, Master Samurai Tech Radio Episode 23, February 8, 2018, I called out all of this and more. I explained that Facebook is scraping all your personal content and interactions with the site in order to build a marketing profile on you and sell this to big marketing companies and government intelligence agencies. THAT’s why it is “free.” In reality, it’s not free. That’s because you’re giving up tons of personal, private information about yourself. Yep, I explained all that right here, starting about 35 minutes into the show (the video below will start playing at that time):   In other words, you are whoring out your personal information so you can watch your niece's dance recital or yak with your "friends."   At Facebook, YOU are the product. By the way, this is generally how the Internet works: if you’re not paying for it, YOU are the product. And I’m here to tell you, what you’ve heard on the news about Facebook is only the tip of the iceberg. People with lots of degrees and initials after their names get paid Big Bucks to design the Facebook platform to psychologically manipulate you and keep you addicted and interacting. Even what you do and say in “private groups” becomes part of your profile and is used to compile a dossier on you. This can be used for all kinds of nefarious purposes ranging from political campaigns to “outing” people for having opinions that are deemed unacceptable or politically incorrect by The Powers That Be. Consequences could include the loss of your job, negative affects on your business, legal harassment, jail or, in the future, "re-education."  Some police departments around the country are already using artificial Intelligence (AI) to mine data and predict crime. And guess what: they suck at it! Unfortunately, the consequences of a mistaken SWAT raid are rarely benign.  But it may even go way beyond that, as I explain in the podcast-- there are credible reports that they’re also manipulating you physiologically by modulating the electromagnetic field (EMF) of your smartphone to influence your brain waves. Who knows what will come out in the next 5 years. You heard it here first! Facebook’s recent data dump scandal is actually damage control covering for something far worse. It's a controlled release of some bad information in order to avoid fessing up to the really bad shit they’ve been doing. People with the inside tech scoop are deleting their Facebook accounts leaving the naive on the plantation. Has the exodus has begun? Let’s hope so. And I’m doing my small part to get the word out. In the words of the Prophet Jeremiah, "Come out of her, my people!" Is Facebook ZUCKing itself into oblivion? It's not unthinkable. Remember that failed Facebook predecessor, Myspace? The graphs below shows how the search volume at Myspace reached a peak and then drifted off into oblivion. Could it happen to Facebook? Well, so far, things are looking pretty similar: After Facebook, another vogue social media plantation will come along that unsuspecting victims will flock to. And what’s the product on all the social media plantations? YOU: your data, your preferences, your fetishes, your biometrics… your mind. Nothing on the Internet is really free-- you are paying somehow. If not with money, then with personal information. That’s why you pay for premium access at Appliantology. Appliantology is part of the free-range Internet (meaning we're off the corporate plantation): no data harvesting, no profile scraping, no compiling dossiers, no selling you as a product to big marketing firms. If you still choose to have a Facebook account, do so with the understanding that they are trying to Zuck you. It’s called the Zuck n’ Jive.  
    • 7 comments
    • 321 views
  • Samurai Appliance Repair Man

    Appliantology is Your Key to Appliance Repair Service Call Success!

    By Samurai Appliance Repair Man

    The Old Skool method of doing service calls was to go out on the call and pray to the pot bellied Buddha that the tech sheet was still hidden somewhere on the appliance. The plan being that, if the tech sheet was still there, you could stare at the lines and squiggles long enough to convince the customer you had reached a definitive and scientific conclusion about the problem.  My friends, I'm here to tell you that the Internet has made this Monkey Boy way of doing bidness obso-frikkin-lete! With powerful information tools, like Appliantology, at your fingertips, there's no need to rely on the pot bellied Buddha leaving the tech sheet for you. This webinar will teach you a whole new way of doing bidness using Appliantology as your trusty information tool, every bit as valuable as your Bosch driver or Princeton Tec headlamp, to increase your First Call Completes and profitability. To learn more about all the splendiferous benefits of being a Professional Appliantologist member here at Appliantology, CLICK HERE!  Learn more about Appliantology and it's powerful benefits to you as a professional appliance tech in our free and fun short course, Appliantology 101: Your Guide to the Ultimate Appliance Repair Information Tool.     
    • 1 comment
    • 1,756 views
  • Samurai Appliance Repair Man

    MST Radio Episode 27: Online Appliance Repair Schools- the good, the bad, and the scams

    By Samurai Appliance Repair Man

    In this special international episode, the Samurai is in Fiji at Samurai International Headquarters, while Mrs. Samurai is in the Team Samurai New Hampshire pavilion. Although halfway around the globe from each other, Team Samurai comes together through the miracle of the Internet to deliver you this timely and crucial information in this episode of Master Samurai Tech Radio. We compare and contrast three online training options with the Master Samurai Tech Academy.      Subscribe or listen to the audio-only podcast here: http://mstradio.com
    • 6 comments
    • 336 views
  • Samurai Appliance Repair Man

    Multi-tech Operators: Grow your business with Master Samurai Tech

    By Samurai Appliance Repair Man

    The problem in the appliance repair trade today is that we have too many parts changers and not enough technicians. Even many experienced techs don't know the fundamentals and technology we're working with on modern appliances today. I'm talking about things like basic electricity, circuits, reading schematics, knowing how to troubleshoot, motors, microcomputer control systems.  What this means is this: you're probably not going to find techs to hire with the skills you need to grow your business.  Solution: hire based on character and then add the technical skills cost-effectively with Master Samurai Tech online training.  Many multi-tech businesses are successfully using our innovative training to grow their businesses. Here's just one example from Todd Daganaar, President of Nebraska Home Appliance, a successful appliance repair company with 9 technicians and growing!   
    • 0 comments
    • 595 views

Our community blogs

  1. The Samurai gave a live walkthrough on how to effectively use Appliantology as an appliance tech information tool: getting familiar with the site layout and content, how to search for service manuals, how to start new topics, and much, much more! BONUS: a quick run through of the Master Samurai Tech Academy.

     

     

  2. What do you do when an appliance, despite all appearances of normality, simply refuses to do its job? The Samurai and I were forced to answer this very question today.

    The culprit: A KitchenAid KGRS505XWH05 double oven all gas range.

    The complaint: The customer told us that neither the top nor the bottom ovens would ignite, but the cooktop worked fine.

    The customer's description turned out to be about right (for once). The upper oven broil and lower oven bake ignitors would glow for 10-20 seconds, and then the control board would shut them off -- you could hear the relay clicking each time it did this. No gas, no flame, no nothing. In addition, the upper bake ignitor wouldn't glow at all.

    We go ahead and pull out the range to test the gas valves and the ignitors. Gas valves test good (electrically, at least). But the upper bake ignitor is reading megaohms of resistance. Way out of spec, so that explains why it wasn't glowing at all. The other two ignitors, however, are reading about 3.3 amps of current during run. That's borderline, but they should still be capable of igniting the burner. And it doesn't explain why the board is shutting them off after they've started glowing.

    Just replace the bad ignitor and slap in a new board, right? That'll fix all the problems!

    Not so fast. While lesser techs might have gone full PCM, we instead cracked out the tech sheet to see how to speak this board's language. 

    This model actually has a pretty nice service mode. You can manually activate each load, check for error codes, do a control reset, all kinds of stuff. We found that when we manually activated the functional ignitors, they would glow, and the board wouldn't shut them off by itself. Progress! We just confirmed that the board is, for some reason, making a decision to shut off these ignitors during normal operation. But they're perfectly capable of staying on if you manually activate them.

    So what now? Maybe the error codes can give us some more info. We retrieve the error codes and, lo and behold, there is one: F1 E0. That's a MICOM communications error, and you know what the tech sheet says to do about it? "Replace the control."

    Okay, so now you replace the board, right? The tech sheet is telling you to!

    We weren't satisfied with that answer. Surely, there's more to be found here? We decided to take advantage of the tools provided by the machine's service mode and do a control reset. Then, we cleared that F1 E0 error code and cycled power to the range. The question to be answered here was this: was that error just a one-time deal, or will the control generate it again?

    After power was restored, we retrieved the errors again: no codes.

    We've proven that the error wasn't a recurring one! One last time, we test those upper broil and lower bake ignitors. They glow. We hold our breath.

    Nothing.

    And then, those beautiful blue flames.

    What happened here? Well, we don't really know what caused that F1 E0 code in the first place. It's possible that a power surge scrambled the control's brains a little. Whatever the case, just the presence of that communications error code prevented the board from wanting to run the ignitors. Why it would be programmed that way escapes me. But then again, the addled minds of Whirlpool's engineers are mysterious, aren't they? The control reset might have helped as well, so I recommend you do that in addition to clearing the error code if you encounter this problem yourself.

    The lesson here is this: always be thorough and logical in your troubleshooting. Figure out how the board thinks and how to talk to it -- replacing it should always be a last resort.

  3. I've been in business for myself for almost 20 years.  I started at age 18, as an antique dealer. My store has always been fluid, changing with the times and the economy.  When I started 18 years ago, my store was situated in a neighborhood that you would call "seedy", to be generous.  It was the perfect location for a used retail store. I've always managed to thrive, even though the "Great Recession ".  At this point in my life, I'm mostly an appliance dealer. I make a good living at my shop, and I don't really work (physically) hard anymore.  

     

    I still find find myself working 7 days a week mostly, about 60-70 hours.  After all is said and done, I make about $150k per year, net.  Give or take.  

     

    My my background is in industrial machines. Ever since I was 10 I was maintaining food processing equipment for my family business.  My brother took over said business and has really thrived on a level most of us commoners could not even imagine.  He really needs/ wants me to work for him. 

     

    Ill cut to the chase. 

     

    Hes offering me $105 k to start, working a very structured 40 hour work week.  Retirement, insurance, etc.  My neighborhood where my store resides has really gentrified, now my location is in high demand. I can rent my storefronts for basically more than what my business can afford to pay. About $50k per year. 

    So option 1: stay, make about 150 per year, long hours, employees, inconsistent income. 

     

    Option 2: get a job, make a bit less (after taxes), at least for now. I would easily believe my salary will double within 10 years.  Very standard 40 hour week, weekends off, vacation, more time with my family.  

     

    Sounds like a no brainer, but I'm terrified.  I've never made such a big life decision. 

  4. Quick's Blog

    • 1
      entry
    • 14
      comments
    • 1348
      views

    Recent Entries

    Is the ship sinking? Is the ship going to sink?

    After 27 years in business I've had to answer yes. My ship is sinking and it's going to sink.

    Never put off thinking until the last minute (what now) by sticking your head in the sand.

    Exiting business can be just as challenging as entering into it.

    I really admire all you technicians. You're hard working, smart, problem solving professionals.

    This site has a great and willing teacher to show you your way to the mountain top! Take advantage of the courses here. 

    Myself, opportunity was just handed to me. I give all credit to God. I'm returning to the oil field as a drilling supervisor. 

    Good luck to one and all. I renewed my membership here just in case. 

    Like I always say. One can always trade a chicken for a service call in hard times. L.O.L.

    Good luck all.

    Quick 

     

     

     

  5. Beyonddoubt's Blog

    • 1
      entry
    • 8
      comments
    • 704
      views

    Recent Entries

    Tide’s Laundry Pod Peeps: America’s Favorite Easter Treat Is Here To Ruin Your Laundry

    peeps-pods-2-1200x627-1024x535.jpg

    When Cascade released their Pumpkin Spice Scented Dishwasher Detergent last fall to great fanfare, the public quickly learned the downside to such gimmicks. The hint of pumpkin spice flavor that remained after a cleaning cycle was reported to affect the taste of everything from orange juice to re-heated Runzas.

    The negative press and customer service demands that Cascade and its retailers had to endure quickly led to the product being removed from shelves. If you ever wondered if there was a limit to America’s love affair with pumpkin spice, look no further than Cascade.

    One would think that marketers had learned a quick, expensive, and hard lesson. One would be wrong. While shopping at our local Hy-Vee, we came across Tide’s latest attempt to capture consumer attention (and it did capture our attention); Tide’s Laundry Pod Peeps.

    Since we at Nebraska Home Appliance care about the performance of your home appliances, we decided to offer our expert take on whether these gimmicky pods were worth your shopping dollar. How did we rate these? Read more at http://nhaparts.com/blog/peeps-laundry-detergent-review/

  6. Tech notes

    • 1
      entry
    • 2
      comments
    • 847
      views

    Recent Entries

    The formula for power in watts is P = I . E where I is current and E is voltage or is it?

    FACT1 : Voltage is the potential for current to flow.

    Theory : Voltage is also called "potential difference" or " electromotive force". As with any measurement we need to have a standard point of reference for voltage that is 0V and another point of interest. The standard point of reference of 0V is earth. Voltage is measured between earth and any other point. However this is not the voltage we should consider in power or work done calculations as voltage in itself does not do work or power in watts.

    FACT2 : Current is the flow of electron.

    Theory: Conventional current flows from a higher voltage to a lower voltage in a closed circuit. Current is a rate measurement that is number of electrons passing a point per second. It is plain to see that higher the potential difference more the electron flow and higher current. Current does work. Current is indirectly proportional to resistance. A definitive test in live testing for a closed circuit or a circuit doing work is to measure the current.

    To summarize, Current only flows and can be measured in a closed circuit. Potential difference is only measured in an open circuit.

    FACT3 : Voltage drop is the voltage that is dropped across a load in a closed circuit. Voltage drop is caused by a potential difference, current flow and a load resistance.

    Theory : Voltage and Voltage drop are very different things which are sometimes mistakingly considered to be the same thing. Voltage can be regarded as a cause, and on the other hand, Current and Voltage drop is the effect only in a closed circuit.

    Only loads have a voltage drop because only they are doing work. Switches donot have a voltage drop. It is voltage will you measure across a switch in a circuit.

    The Load is the final peice of the puzzle. In a series circuit the voltage drop across a load is directly proportional to the Load resistance and current. There maybe one or more loads is series. In this case the  higher the Load resistance the greater the voltage drop since current remains the same is a series circuit.

    Voltage drop in a parallel circuit is the same as source line voltage in quantity but if a brach in a parallel circuit is opened by a switch the there is no current flow through that branch so no voltage drop but there will still be a potential difference or Voltage. The other branches will have voltage drop and the as an effect the total current drawn will be reduced.

    For testing a series circuit we need to switch on and measure current and voltage drop across the load. The product of these two measurements will give you the power in watts. Voltage drop divided by current will give you load resistance.

    Lets consider a series circuit with line voltage, one or more loads and an open switch what is the power consumed by the loads? OK that's easy liven the circuit and measure voltage drop across each load we should read 0V and use the E square by R formula we will get zero power consumed. Remember the switch is open means there is no voltage drop. So zero power is consumed. The switch is a control. However there will be a potential difference of line voltage across the loads when tested before and after the switch.

    Now let's close the switch. Potential difference across the switch drops to 0V and there will be a voltage drop across each of the loads. Current will also be present. Potential difference should be measured using a loading meter to rule out any open neutral fault.

    Protective devices are reactive temperature effected devices. PTC thermistor, bimetals, fuses are some examples of protective devices. They protect the load and the conductors from over current. With the appliance plugged in you should read 0VAC across these devices under normal conditions that's because they are normally closed. In cases of overheating the protective device will open and then you should read line voltage across its terminals. 

    In conclusion voltage and voltage drop are cause and effect respectively. Power in watts is the product of voltage drop and current, is the formula for appliance repairs. To definitely test a circuit we should do voltage drop and current tests.

  7. Moostafa
    Latest Entry

    Hello, my infidel friends. Today, I would like to share with you a sad tale which illustrates the cultural distinction between the low-brow Arab people and the much more refined Pashtun and Tajik tribes of Afghanistan:

     

    Quote

     

    Customs officers at the Hamad International Airport, in the Qatari capital, have arrested a Yemeni man attempting to smuggle more than 12 kilograms (27 lbs) of sliced bacon hidden in his anal cavity.

    53-year old Abd al Rahman Shamoun, was spotted by a specially trained police dog, looking for drugs or pork meat on passengers and in their luggage.

    He appeared visibly nervous and sweaty, so the customs took him in a separate office for a more thorough search and investigation.

    The search revealed 4 larges condoms hidden in his anal cavity, each containing more than 3 kilograms of bacon.

    qatar3-2.jpg

     

    The full story is published here.

    You see, here in Afghanistan we do not have such problems as discussed in the above article, for we consume the "bacon" of male yak. Since it is made not from pigs, our "bacon" is halal, that is, it is permitted under the Sharia laws of Allah, the Merciful and Compassionate, who irritates the bowels of the wicked.

    This article is but one of many examples of Arab dull-wittedness. Had Abd al Rahman Shamoun known about the enlightened Afghani yak "bacon" delicacy, he would not have needed to smuggle the unclean pig flesh in his even more unclean rectum. 

    It is true that my sand-slinging Arabian brethren have a rather difficult time telling the two flesh meats apart since they have no yaks in Arab countries. But penis of yak is an ancient delicacy among the the Pashtun and Tajik peoples of Afghanistan. 

    large.57715cbae54f0_yakpenis.png.6fbcc09

    Although harvesting the "bacon" of male yaks leaves them neutered and impotent, the smoky, salty delicacy is a cherished part of our tribal bonding rituals.

    I would like to point out the squirreling away of items in one’s rectum is an age-old technique of my people to hide our possessions, few they may be, from the many infidel invaders who have troubled our country in the past. It is part of the standard education of all boys here in genteel Afghanistan. Yes, I remember being a young boy and the extreme discomfort whenever I sat down.

    This man in the news article was–how do you say in Ameedica–an amateur. While I was in the elite Appliance Repair Corps of the feared Mujahideen warriors, I once carried my entire tool bag in my rectum for 50 miles past military checkpoints just to repair one, smelly washing machine. I have never been structurally the same since that day though. We shall see what happens to the man in this article, for my keffiyeh-wearing cousins are known to overreact.

    Allahu Akbar!

    Moostafa

  8.  

    We all want to grow our companies,  but finding and keeping qualified techs or just finding anyone that posseses even the slightest work ethic is a difficult,  near impossible task.  This song laments this sad state of affairs but also is a tribute to the recent passing of one of the greats. 

     

    Scroll down,  start the video,  scroll back up and sing along! 

    Whirlpool Drain (or if Prince was an Appliantologist looking for good help) 

    Maybe you never meant to cause me any sorrow
    Maybe you never meant to cause me any pain
    I only wanted to one time see you working
    I only wanted to see you
    working on a Whirlpool Drain

    Whirlpool Drain, Whirlpool Drain
    Whirlpool Drain, Whirlpool Drain
    Whirlpool Drain, Whirlpool Drain 
    I only wanted to see you
    Steaming up a Whirlpool Drain 

    I never wanted to be a hard-assed employer
    But neither could I be some kind of friend
    Now please go away,  go work for another
    For your employment with me has to end

    Whirlpool Drain, Whirlpool Drain
    Whirlpool Drain, Whirlpool Drain
    Whirlpool Drain, Whirlpool Drain
    I only wanted to see you
    Underneath a Whirlpool Drain

    Dude, I know, I know
    I know  appliances are changing
    It's time we all reach out
    to learn something new, that means you too

    You say you want me to teach you
    But you can't seem to concentrate your mind
    So I think you better pack it
    Since you can't even Ptrap a Whirlpool Drain

    Whirlpool Drain, Whirlpool Drain
    Whirlpool Drain, Whirlpool Drain
    Service Owners, if you know what I'm singing about up here
    C'mon, raise your hand

    Whirlpool Drain, Whirlpool Drain
    I only want to have one
    Only want to see one
    Working on a Whirlpool Drain

     

    This song debuting on AppLYRICology  Best of Durham Music Vol 1  

     

  9. Well ladies and gents. Sorry I have been MIA for a while. Life has been crazy with service calls and my new technician. Also had our first baby (technician in training) blogentry-82264-0-29266900-1449760812_th. It's been an amazing experience. I am loving every second of it. It has been tough through all the changes which is why i have been absent from here for a bit. But i'm BACK! I hope the Samurai and Durham have been holding the fort down and not letting you guys get away with too much! hahaha.

  10. acfixerdude's Blog

    • 1
      entry
    • 4
      comments
    • 2587
      views

    Recent Entries

    It was during the first break of day in the middle of a heat wave when we first received the call. A villager had requested assistance with a situation he could no longer contain. He and his family had been attacked by a once well behaved friend taking residence inside their home. This well-behaved friend had turned into a villainous foe, terrorizing the family by destroying their stockpiles of sustenance when least expected, an action which severely disrupted the family’s daily routine. They called upon us to fend off this rebellious foe and to restore civility back into their home.

    So with a brave heart I prepared for impending battle. With my heavy weapons strapped to my side and only experience to guide me, I journeyed to the residence in need. When I arrived I was greeted by the saddened man and his family, begging me to tame the beast that ailed them. As I stepped into the arena of battle a sinister smell caught me off guard. The smell of burning copper singed my nostrils as I made my way towards the beast’s lair. It seemed to be annoyed by my presence and howled in anger. A great battle emerged as the two newly made arch-enemies began their attacks. Though the beast was a respectable foe, I took swift, fearless action and it was quickly and easily defeated. I had tamed the beast back into a domesticated pet, doing only as it was originally intended to do.

    In order to prevent such rebellion and travesty in the future, I trained the villager on how to properly discipline and care for the now domesticated beast. I left him with the knowledge and the proper tools to keep his family’s stockpiles of food from ever being destroyed again. The villager and his family were eternally grateful and he practically offered his oldest daughter’s hand in marriage as a token of appreciation. As I left his home victorious, I only hoped he’d pay heed to my instructions.

    Was this some sort of animal you ask? I would only tend to describe it as an animal when misbehaving, but no, it was not. Everybody has one of these often friendly devices and the same thing can happen to you and your family if you fail to take notice and learn the necessary information that this young villager learned the hard way. In fact, there are many friendly devices in your home that require tender loving care every so often. If left unattended to for too long it is very possible that they will turn on you and the situation can get very ugly; even uglier than the story I just told you.

    So what was it living in this nice family’s home that turned so villainous and destroyed all of their food? It was that which was originally supposed to keep their food safe from spoilage, insects and other hungry animals; their refrigerator. If you’re not careful, it may happen to you too.

    --------------------------------------------------------------------------------

    So, if your usually domesticated appliances start giving you a fuss and you happen to live in or near the village of Lubbock, TX - head no other place than to LBKappliance.com and summon the brave knight to bring your appliances back to order. If you're elsewhere, go to appliantology.org and The Alliance of Appliantology may be able to help you to kick swift appliance butt!

  11. Smashycomman's Blog

    • 1
      entry
    • 16
      comments
    • 3199
      views

    Recent Entries

    LONG AGO IN A DISTANT LAND..

    The people were happy. They had not a care in the world. They thought their beloved appliances would always behave. They woke up in the morning to the quiet hum of refrigerators, keeping their daily meals nice and fresh. They used washers and dryers to clean clothes to pristine condition. They used the microwaves to heat their food quickly and efficiently. They thought the appliances would always be there for them, always making their lives easier.

    .....They thought wrong.

    Suddenly, one day, as if from nowhere, the appliances attacked!

    The Washer began spewing water all over their beautiful laundry rooms:

    Washer

    The Dryer began spitting fire and smoke everywhere:

    Dryer

    Microwaves took to the skies, shocking the citizens in horrible flocks:

    Micros

    Fridges stopped cooling the food, turning it into gookus, and then spewed noxious odors into everyone's faces:

    Fridge

    "OH THE HUMANITY! IS THERE NO ONE TO SAVE US?! IS THERE NO ONE WITH THE SKILL TO STOP THESE EVIL MACHINES?!", the citizens cried!

    Have no fear, good people! Your heroes are here!

    Introducing....

    The Alliance of Appliantology

    "Fighting atrocious appliances with aptitude!"

    This Troop of Techs scour the land, searching for any disobedient appliance, doing battle with them, and turning them back into the good machines they were made to be!

    First up, we have the Appliance Technician himself, Walter:

    Walter

    Walter is a monkey. His weapon is a katana, mixed with a flashlight. Good for slashing and scaring off those appliance monsters who are afraid of the light.

    Next is Weswayne, or just Wayne:

    Wayne

    Wayne is a seahorse, wielding a screwdriver-shooting crossbow. Nothing wrong with a ranged weapon!

    Here's Scottthewolf, or more appropriately, Scott the Lion:

    Scott The Lion

    Scott is smartly using meter leads, one of a tech's most powerful tools, he's using them as axes, but I guess that gets the job done!

    Here's some guy named Smashycomman, or just Smashy if you're confused on what a "comman" is:

    Smashy

    He uses a giant screwdriver as a warhammer. There's a better use for that, kid!

    Don't forget about DanInKansas, or maybe just Dan:

    Dan

    Dan is a beaver, who uses a shield and spear with pliers on the end. Stick 'em with the pokey end!

    Last, but certainly not least, is our very own DurhamAppliance, who's gonna go by the very serious name of Durham:

    Durham

    Durham is the highest-ranking member of the group so far. Yes, he's a pink unicorn, but don't let that make you think he won't smack yer teeth out with his mages' staff.

    Our citizens are saved! With their incredible knowledge of the inner-workings of these dastardly monsters, the Alliance of Appliantology takes them down one-by-one, turning them back into the hard-working and wonderful machines they should be. The citizens are very thankful! The day is saved!

    Want to be in the Alliance? Here's one way:

    BEGIN YOUR TRAINING

    Ok, so, I decided to do this after making a "What animal would you be?" thread on the 40-watt club sub-forum. What started as just a dumb question got me thinking about how fun it would be to actually draw these guys as these animals... then one thing lead to another and here we are. This took about 2 months or so. Having a kid makes it so you really don't have much time anymore! Anyway, hope you guys like it!

  12. tpoindexter's Blog

    • 1
      entry
    • 9
      comments
    • 3076
      views

    Recent Entries

    I was talking with another tech this morning about checking RPM. this brought up the subject of strobes. As we were

    discussing strobes it occurred to me someone had probably created an app with RPM already. Shazaaam!!! :woot:

    Here's a app that will allow you to test RPM on fans. You can also test motor rpm, if, you place a mark on the shaft.

    https://itunes.apple.com/us/app/strobe-light-tachometer-to/id708094321?mt=8

    To check fan speed just dial it in till the fan appears to be not moving at all. That'll give you your RPM.

    Same with a motor if you mark the shaft. When the mark appears to no longer be moving you've got the RPM.

    I'm not really sure if this is the correct use of this Blog thingy, but, bet I'll find out sure enough!! Yeeehaw!!!

    Huh... I hope I wasn't the last person on earth to figure this out!

  13. Miele produces the best dishwashers on the market today. They are high end machines...very quiet, they wash well and last many years beyond the life span of a lesser quality brand. However, like all machines they do break down. One of the most common failures to occur on a Miele dishwasher is the Water Proof System (WPS). That's that mysterious grey box under your sink. What is that thing?

    20150424_165731.jpg?w=300&h=169

    The WPS is a dual water inlet valve. The redundancy ensures that if one valve fails to close the other will, greatly reducing the chance of flooding your kitchen. That brass part on the left attaches to the house plumbing, the box contains the two solenoids and the gray tube contains the water intake hose, the wiring and outer sleeve. When the electronic calls for water the solenoids open and the water flows through the intake hose and into the dishwasher.

    The outer sleeve acts a protection against leaks. If the solenoids leak the water will flow along the outer sleeve and into the drip tray in the base of the dishwasher. When enough water accumulates the float switch will be activated and the water intake will stop. The drain pump will also be activated until the machine is unplugged or the water is no longer present in the drip tray.

    20150424_170739.png?w=241&h=300

    The inlet to the WPS contains a filter and a restrictor. The filter stops large debris from entering the system and the restrictor ensures correct water pressure. The filters often get clogged and can be easily cleaned.

    20150424_165810.jpg?w=169&h=30020150424_165832.jpg?w=169&h=30020150424_165841.jpg?w=169&h=30020150424_165855.jpg?w=169&h=300

    The Miele dishwasher service manual states:

    The WaterProof System (WPS) consists of a number of interdependent safety features to provide protection against water leakage.

    1. Protection against solenoid valve leakage: Each water intake is controlled by an inlet valve. If this valve cannot close properly due to some defect or blockage by a foreign object, a second inlet valve ensures that the water supply is shut off.

    2. Protection against water intake hose leakage: If a leakage occurs, water flows along an outer hose sleeve surrounding the intake hose to the drip pan. Here a float switch then acts to switch off a microswitch which closes the inlet valves to cut off the water supply.

    3. Protection against dishwasher overflow: If some defect has caused the water level in the appliance to rise so that it overflows into the drip pan, and the water quantity sensor has also failed, the float switch is activated. This switches off a microswitch which closes the inlet valves to cut off the water supply. At the same time the drain pump is activated.

    4. Protection against drain pump failure or blocked drain path: In this case the water level in the appliance rises until it overflows into the drip pan where the float switch is activated. This switches off a microswitch which closes the inlet valves to cut off the water supply.

    Thanks for reading.

    David

    RD Appliance Service, Corp.

    http://www.rdapplianceservice.com

    RD Appliance Blog

  14. Here's a Thai-inspired chicken soup that is easy to make and bursting with flavor! It's healthy comfort food with an Asian twist.

    gallery_66_28_153393.jpg

    Ingredients

    • 2 tablespoons coconut oil, ghee, or butter
    • 1 onion, chopped
    • 1-2 pounds uncooked chicken breast, diced
    • 1 inch piece of fresh ginger, peeled and chopped fine
    • 4 cloves garlic, minced, divided
    • 1 quart chicken broth (I use either homemade or a box of low sodium, no added MSG.)
    • 1 can coconut milk (look for this in the Asian/Thai section of the grocery store. I prefer regular, not "lite".)
    • 1 lime, juiced, divided
    • ¼ tsp. red pepper flakes
    • 4 scallions, chopped
    • ½ bunch cilantro, chopped
    • salt, to taste
    • optional: Thai fish sauce, cooked rice

    Directions

    Heat a soup pot over medium high heat, then add the coconut oil. Saute the onions with a little salt for a few minutes, then add the chicken chunks with a little more salt. Cook, stirring frequently, until chicken is just cooked through. Add the ginger and half of the garlic towards the end of this.

    Stir in the broth and bring to a boil, then stir in the coconut milk, half of the lime juice, and the red pepper flakes. Reduce the heat to low and simmer covered for at least 15 minutes (longer is fine, too).

    Turn off the heat, and add salt to taste (depends on the amount in your chicken broth). Stir in the rest of the garlic, the scallions, and most of the cilantro (leave a little aside for topping individual bowls). Add the rest of the lime juice if desired. Cover and let sit off-heat for 5 to 10 minutes, then serve.

    Great served over rice. Add a few drops of fish sauce to your serving to knock the flavor out of the park!