Search the Community

Manufacturer: Kenmore Type of Appliance: Dishwasher Model Number: 665.13219k902 Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes Need service manual for disassembly tech sheet as well

Hi there, I'm hoping someone can tell me the cost to repair this dishwasher by a professional. There is a hole in the tube shown in the photo causing the dishwasher to leak. Also, what is the availability of the tube? What is it called? TIA!!

Manufacturer: ge Type of Appliance: dishwasher Model Number: GHDA960K03BB Have you validated the model number at an online parts site like Repair Clinic? (yes or no): yes Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): yes thx a million, i need the full service manual for dissassembly instruction

Hi, My Miele G2670 dishwasher stops a couple of minutes into any cycle with a pair of F63/F84 error codes. I've stripped, tested and rebuilt the "slide shutter assembly" that is on the side of the circulator pump, the part the codes refer to. Encouragingly there were obvious signs of a leak from it that had shorted and corroded its wiring at the connectors. All cleaned up now and motor/rotation and micro-switch checked working off the machine, reinstalled and..... F63/F84 after two minutes. Not sure what to do now as there seems little chance that and a replacement pump/shutter assembly is going to solve this. Also, I'm under domestic pressure because my hifi went wrong on the same day but I've fixed that. Thanks! PS Same thing happened a year ago and I was able to fix it just by opening the machine and staring at it really hard. Actually I think someone had posted quick fix using a button combination that worked and I can't find now. Anyone remember it?

Manufacturer: bosch Type of Appliance: dishwasher Model Number: SHE33M02UC/50 Have you validated the model number at an online parts site like Repair Clinic? (yes or no): yes Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): yes greatly appreciated thank you for the manual

Manufacturer: bosch Type of Appliance: dishwasher Model Number: SHX65T55UC/02 Have you validated the model number at an online parts site like Repair Clinic? (yes or no): yes Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): yes need the manual thx

Manufacturer: bosch Type of Appliance: dishwasher Model Number: SHX65T55UC/01 Have you validated the model number at an online parts site like Repair Clinic? (yes or no): yes Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): yes need service manual thx

Manufacturer: gne25jskbfss Type of Appliance: DISHWASHER Model Number: gne25jskbfss Have you validated the model number at an online parts site like Repair Clinic? (yes or no): YES Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): YES NEED FULL SERVICE MANUAL THANKS!

I replaced my pump and motor assembly as the dishwasher was not cleaning the dishes. Since doing so, my dishes come out of the cycle dripping wet. I checked the connections and continuity of both my heating element and high-limit thermostat. What more can I do to keep my dishes from crying? Thanks! -Emkay

Hello, My dishwasher is out of warranty (parts and labor) and I'm looking at repairing it myself. The dishwasher is only a little above 2 years old. The manual is located at this link Initially what happened was an Ed error code suddenly came up on the display, which I researched is a signal error; communication error between the display computer and the main computer. When I reset the dishwasher from the breaker, it no longer showed the error code on the display, and no lights and display. I reset it many times, waited over 30 minutes before turning it back on again and no lights and display. So now it doesn't even show the error code. No burnt smell. Some things I checked already: no water plugged or leaking anywhere Connection to power source is good (110v). Door latch and switch the door latch whether closed or open does not light up the display I shorted the connection on latch switch and still nothing on the display The main computer is getting power I took out the main computer to inspect it. No burns anywhere on front or back or signs of being exposed to water/moisture There are two built in fuses on the board which I checked and have continuity The display computer is getting power. connections going to the display are getting power I took apart the display computer which is glued on and no signs of being burnt or exposed to water/moisture Wires all wires inspected for burns or breakage, and no signs of that My diagnosis so far leads me to conclude the problem is with the display computer. But I could be wrong, and that's why I'm here for any advice! Thanks in advance

Manufacturer: GE Type of Appliance: DISHWASHER Model Number: PDT720SSH5SS Have you validated the model number at an online parts site like Repair Clinic? (yes or no): YES Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): YES I NEED THE SERVICE MANUAL AND SCHEMATICS THANK YOU

GE Dishwasher (GDF610PGJ2BB) water would not drain so replaced drain pump on Friday, May 29th. The first two loads it ran with no problem. Today the drain pump runs nonstop and the control panel is not counting down from estimated time. Guessing the drain pump burnt out because of this same issue. The dishes appear to fully cycle and be clean but not dry. Searches of similar issues with GE Dishwashers have led me to believe it might be the Flood Switch or Control Board, but that is a guess. Any advice on what might be causing this problem?

Hi, My dishwasher will fill water (and will intermittently drain some water too), but the circulation pump/sprayer does not start. In between I can hear a faint electronic hum, as well as the odd relay clicking. After an extended period of time it will give the 5 beeps (as if the wash cycle was completed). However when it does the 5 beeps, the water isn't emptied and is full up to the base of the door in the tub. I also noticed that the heater was on (if that's of any relevance). I've tried to turn off, wait 10 minutes and turn back on the dishwasher from the main breaker, but there was no difference. Also, I read about a "reset" sequence (i.e. hold down the power scrub + rinse & hold buttons for 10+ seconds). When I tried this, the "clean" light turned on, but nothing happens when I close the door. I believe it's supposed to force the tub to drain. Note the drain pump seems to be functioning, as I hear it sometimes turn on and drain excess water. Also, I inspected the check-valve, and it seemed to be working okay. My guess is that either the control board is bad, or the circulation pump is faulty? Please advise.

Hello and thanks for this wonderful forum. The dishwasher makes all the right sounds as well as heats up but I do not think there is any spraying taking place. I have checked the following: Inlet fill valve-Clean, it had some black plastic pieces, I cleaned it all out. Could have been one of the washers. The filter was not dirty, but I cleaned it really well with a tooth brush. The circulation pump-took it out, checked it, looks brand new, put it back in, still no spray. Can I connect the pump to 110 volts and check if it is working? My guess now is the control board, which on this Dishwasher is a really accessible, 30 minute job to replace it, but just wanted to check with the experienced DIYs on this forum before I ordered it.

Manufacturer: FRIGIDAIRE Type of Appliance: DISHWASHER Model Number: FDBC45BAB0 Have you validated the model number at an online parts site like Repair Clinic? (yes or no): YES Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): YES TECH SHEET GREATLY APPRECIATED THX

Manufacturer: MAYTAG Type of Appliance: DISWASHER Model Number: mdb7749awm2 Have you validated the model number at an online parts site like Repair Clinic? (yes or no): yes Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): yes i need the tech/service sheet, thank you

Hello, I finally installed a Kenmore dishwasher 587.14249991 that I bought 2nd hand and had put in storage for a while. When I turned it on, the motor started (it was making motor noises at least), but no water came in. The water valve under the sink is open, of course. I replaced the water inlet valve, that did not solve the problem. The overflow switch is good, at least according to my multimeter reading. What else could it be? Thank you!

Manufacturer: Whirlpool Type of Appliance: Dishwasher Model Number: WDT710PAYB6 Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes

Hi there helpful folks. This forum has been very helpful as I've navigated this broken dishwasher. Last week it stopped spraying when running a wash cycle. Water fills the bottom, the soap pod does come down, but doesn't dissolve fully, and food particles in the bottom barely move. It does drain if you run the drain cycle once water is in the bottom. So far, I have: Checked filter (clean) Thoroughly checked the float for debris (cleaned and clear) Removed and run water through the spray arms (all running just fine) Run diagnostic mode (it shows a 4-3 error code) Replaced the circulation pump motor (THAT was fun) I'm kind of at a loss of what to do for my next steps, and of course, there are no resources over the phone. Trying to avoid anyone coming into the house right now. Any guidance would be much appreciated!

Manufacturer: GENERAL ELECTRIC Type of Appliance: DISWASHER Model Number: GSD6660G03SS Have you validated the model number at an online parts site like Repair Clinic? (yes or no): YES Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): YES Tech sheet required for this model thank you very much

Hi! newbie here! i've got a whirlpool dw WDT750SAHZ0 that has worked fine for over 6 months of daily use -- i bought it from a "scratch-n-dent" store. just yesterday, dw lights showed "clean." i oped the dw, and the dishes were all dirty. tried to run it again, then realized there's no water getting into dw. i checked the float, and i hear a faint "click," so i'm thinking that part is ok. i put the dw into a cycle mode, and i do hear a motor which i'm assuming would be a water pump running, but inside is dry as a bone when i open it up. now i'm assuming it's the water inlet valve. (that being said, i do have a mouse problem -- little bugger just chewed up my printer power chord. could mickey have eaten some of the wiring on the water inlet valve?) sidenote: i did check the water supply and it's on, as always -- it's just saddled into my hot water supply for my kitchen sink so it's can't be off unless i turn it off at the source. since we live way out in appalachia, finding an appliance repairman will be an exercise in extreme patience, and i'd like to be able to at least give him a hint before he drives all the way out here, only to find he doesn't have my particular water inlet valve. i was wanting to run a diagnostic test. unfortunately, there is no instruction on how to do so with this model. the only instructions i've found say to hit the "rinse" cycle. there is no "rinse" cycle on this model. it's got "sensor/heavy/normal/1-hour wash/soak & clean." there's no display either. on the other hand, am i just "pissin' up a drain pipe" even bothering with a whirlpool self-diagnostic? is it of any value? oh, did i mention that being the scaredy cat that i am, in order to block the mouse, i sprayed copious amounts of foam insulation into every crevice i could find, including the sides of the dw kickplate? 😳 thanks in advance! wendy 🙂

Manufacturer: kitchenaide Type of Appliance: dishwasher Model Number: kdfe104dss2 Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes I am looking for the manuals, and information regarding the tech sheet for this model, thank you very much!

Dishwasher crashed, pump appears to be working, display shows :20 , but goes out if you push any other button. Close the door the pump starts and runs a few minutes then nothing

I am new here. Ok I am mechanical but not Electric or circuit savy. I can trace a circuit and wire stuff but That Green Board with little things all over it is an EVIL Nemesis. Prob item , Whirlpool Dishwasher. Model # WDT780SAEM2. Issue: User interface panel. No lights. Filled with water. came back the next morning. Nothing . no lights. I have voltage detector that is blinking and chirping while I pass it along all the wiring. I bailed the sump out and washed the filters. I tried the turn off power and let sit. ½ our, 1 hour, 24 hours, etc. I looked underneath and no leaks. I have a very good supply parts house here in town. he gave me some tips but can't help to much. This was purchased from Home Depot if that is a help. I can't start switching out parts and narrow it down. I am leaning to the user button console. that would be my limit. I owned an Asco European basic model that I piked up cheap 15 years ago. It lasted 12 years. The sales rep seemed shocked as they were not known for their longevity. the interface / user buttons console is 87 plus tax. the whole computer is 200. WE just bought this in 2016. I live 40 mile from Greenville ohio. THE MUTHERSHIP! That is where this puppy was born. I have known folks who work there. Darke County Ohio. Home of Annie Oakley and the largest county fair in the country. Why are they doing this? LOL.