Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


Search the Community

Showing results for tags 'Washer'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Appliantology Welcome Center
    • Site Orientation
    • Announcements
  • Professional Appliance Technician Forums
    • Appliance Repair Tech Forum
    • Master Samurai Tech Workshops
    • Samurai's Appliance Repair Video Classroom
    • Samurai’s Appliance Puzzles
    • The Dojo
  • Appliance Service Manual Requests
    • Appliance Service Manual Requests Forum
  • Appliance Repair Trade Resources
    • Looking for a Tech
    • Looking for a Job
    • Appliance Repair B2B Resources
  • DIYer Appliance Repair Forums
    • DIY Appliance Repair Help
    • Appliance Haikus

Blogs

  • Samurai Appliance Repair Man's Blog
  • kdog's Blog
  • Mrs. Samurai's Kitchen
  • DurhamAppliance's Blog
  • applianceman97's Blog
  • LI-NY Tech's Blog
  • tpoindexter's Blog
  • Eugene's blog about stores, fixing, life, and more!
  • Appliance Repair Tech Tips
  • Koi Guy's Amazing Compendium of Timeless Appliantological Wisdom

Categories

  • Appliance Repair Manual Stash Access File®
  • Appliance Repair Manual Pot Luck Supper

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

  1. Kawe777bwho kitchenaid direct drive whirlpool rocking back and forth ? IMG_4266.mov
  2. I have an LG WT7300CW 01 washing machine. At one point it began to turn on only when it wanted, and recently outright stopped turning on. I took it apart to take a look and deduced that when the front touch panel is attached, the thing would lock up and no longer work. I figured the issue was the panel went bad so I ordered a used replacement from eBay. Hooking that one up did not solve the problem, and I’m no longer sure what the issue is. I would think the board is the issue, but when I interface with the board without the touch panel, everything works fine. https://imgur.com/a/St0DuBY I took a video showing the issue. In the video, the touch panel is installed and the dial will not work. I quickly uninstall the panel and try to rotate the dial again, but now it works. This suggests that attaching the touch panel breaks the circuit. I could see that being the issue with the old one, but then why is this also happening with the replacement. Maybe the seller sold me a bad one I suppose, but I wouldn’t know how to test that. Right now we’re using it without the touch panel but ideally would want it fully assembled again.
  3. Manufacturer: BOSCH Type of Appliance: Laundry Washer Model Number: WFMC640SUC/03 Have you validated the model number at an online parts site like Repair Clinic? (yes or no): yes Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): yes Looking for the service manual for BOSCH 00436437 to troubleshoot error code E 15. Below are the model #s.
  4. I have an Admiral ATW4475VQ1 top loading washing machine that tries to shake itself apart every time it's in the spin cycle. I've already done a few things to find/fix the issue, but it's still not much better. The things I've tried: 1)making sure the washer is level 2) making sure the laundry load is balanced 3) replacing the 3 suspension springs 4)checking the pads under the drum The machine is level, loads are balanced, and the pads look fine. Replacing the springs helped a little, in that the drum doesn't bang against the sides much anymore, but the whole machine shakes worse than it did. It'll try and walk itself out of its closet if I don't sit on it. I'm not a professional, so I'm not sure what to look for next. Any insight, tutorial links, etc. would be greatly appreciated by me and probably my downstairs neighbors. Cheers!
  5. I have a GE WSM2700DAWWW combo washer dryer that will not agitate. I have the front cover off and the motor makes no attempt to move after filling. The dial does not advance after filling. If I move the dial manually, it will do the rinse and spin so the motor works and belt is not broken. Any help/ideas greatly appreciated.
  6. I have a Kenmore Whirlpool from 1979, belt-driven, no electronics, 110.82082110 Never gave me any trouble except the belt had to be tightened once Now it jams suddenly and won't do anything but fill. I had just done a full load, was running on load 2, I heard a squeak for 3 or 4 seconds, then everything but the motor stopped. Drum would not turn/move at all even by hand. Viewed from behind, the motor turned but the belt didn't move. While unplugged, I moved it by hand and at first it almost took two hands. It got easier in two steps until it was very easy. I turned it on and it ran for two minutes, then I heard a CLINK and immediately the belt stopped again. Pushed it by hand again, this time it got easy faster. Turned it on, put it in the spin section as well as the agitate section of the cycle. I ran it for 3 minutes and turned it off. It worked well but I didn't do anything and I'm sure the problem is not solved. The wig-wag solenoids seem okay, the rods inside move. I've looked at everything, don't see anything that is broken, but I don't know what to look for. TIA.
  7. I have a whirlpool cabrio model WTW7340XW2. I replaced the shaft, seal, and bearrings. Now i get a UL code on every load. Any suggestions of what the problem could be? Thanks
  8. Alliance Speed Queen SCN SCU SCL 020, 030, 040, 060 Commercial Hardmount Washer Extractor Manual View File Alliance Speed Queen SCN SCU SCL 020, 030, 040, 060 models commercial hardmount washer extractor manual PUB F8354701R8 Submitter igloo Submitted 08/12/2021 Category Appliance Repair Manual Pot Luck Supper  
  9. Version 1.0.0

    26 downloads

    Alliance Speed Queen SCN SCU SCL 020, 030, 040, 060 models commercial hardmount washer extractor manual PUB F8354701R8
  10. Good evening, this is my first post ever. I am trying to locate the manual and schematic for a washing machine which is occasionally leaking (enough water to soak 1 or 2 paper towels) at the front left leg. I initially accused my cat of peeing there but she swears that this is not the case. If you could help us locate the evidence to exonerate her, she would be much obliged. Thank you. 🐾
  11. Kenmore 110.25902400 Washer Tech Sheet View File Kenmore DD washer model 110.25902400 tech sheet PUB 8539562 Rev C Submitter igloo Submitted 04/24/2021 Category Appliance Repair Manual Pot Luck Supper  
  12. Version 1.0.0

    35 downloads

    Kenmore DD washer model 110.25902400 tech sheet PUB 8539562 Rev C
  13. Manufacturer: Whirlpool Type of Appliance: Washer Model Number: 110.28922791 Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes Need kenmore 90 series tech sheet thanks
  14. Manufacturer: Kenmore Type of Appliance: Washer Model Number: 110.20172001 Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes 110.20172001 Manual needed PS. What is the most effective way to look up kenmore stuff on this site Every time I search thousands of things come up
  15. I need help diagnosing my washer. The problem arises when the washer is going through its normal cycle and then later stops mid-cycle to show the IE error code. It's a head scratcher because I've tried almost everything I know to be associated with the IE error code. So far I've, -Checked all the hoses (water & drain) for any kinks, leaks, or blockage and debris. [All Clear] -Checked and cleaned the mesh filters for the water intake. [All Clear with the exception of very light mineral deposits] -Checked the water valves, hoses, and pressure were open and flowing normally. [All Clear] -Checked and cleaned the drain hose including its positioning to prevent siphoning. [All Clear] I keep reading through the manual too but I'm at a complete loss. https://www.searspartsdirect.com/model/2gpz2eaxe3-000583/kenmore-elite-79631523211-washer-parts Any ideas? Thanks to anyone who can help.
  16. The current status is: Dryer works fine Washer light comes on when activated (i.e. pull the knob out) Washer does not Fill with water Rotate Drain (based on sound) I'm looking for information to help me find the pump (ic) board; check the fuse; test the pump I don't know if I have multiple failures (perhaps caused by the impact when the spring broke): the speed controller, the pump, etc. Please advise History, oldest to most recent Washer ande dryer worked fine Loud noise and washer stopped rotating in any mode Diagnosed a broken support spring Received and installed a replacement spring (and a replacement electric washer moter, belt, and schocks ready to return for a refund) Washer fills but does not spin. During what would be wash cycles, the drum rotates rarely and slowly. Drain pump makes a lot of noise Remove drain hose (drump to pump) and empty coin trap (it was full) Reinstall drain hose Washer fills but does not spin. During what would be wash cycles, the drum rotates rarely and slowly. Drain pump makes a lot of noise Attempt to clear hose from pump to exit pipe
  17. The selector knob on our Whirlpool Duet washer either got misaligned or is not communicating correctly with the computer board. The knob is in good working order and I've checked that it is on the stem properly. But the cycle the knob points to is not the cycle the washer is selecting on the control panel. It's almost like it "lost" certain cycle options. When the knob points at "white wash" the control panel shows two dashed lines and no wash temp, speed, etc are selected. When pointed at the Normal Cycle, it doesn't register anything on the panel. When pointed at Delicate and Hand Washables, cycle options register on the panel but I'm not sure they are the correct cycle settings. No matter where the knob is pointed, a hot wash cannot be selected (unless I change the setting using the buttons for wash temp). Wash times and temps register when the knob points to Soak, Soak/Drain and etc. And when I turn the knob to the blank space between the drain options and the white wash, cycle times show on the control panel. We tried unplugging for 1 minutes and a reset didn't help. Any idea what could be wrong and if it is serviceable? Thanks for any tips.
  18. Manufacturer: Kitchenaid Type of Appliance: Dishwasher Model Number: Kdte234gwh0 Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes Manual needed thz
  19. Manufacturer: Ge Type of Appliance: Washer Model Number: GTW680BSJ3WS Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes How do I change the tension rods on these? I had to abandon a job today because I couldn’t figure it out please help part number WH16X26911
  20. Hello! I keep getting a water error on my Miele W1926 washer. I've cleaned all (4) of the hose filters multiple times, but I'm still intermittently getting this error. I found a thread on automaticwasher.org where folks were commenting that the triple intake valve can get clogged by hard water and the usual fix is to replace this valve. For the life of me, I cannot find a parts diagram or repair manual that lists the part number. I'm about to just tear into it and see if the valve has a part number listed on the side, but figured I could post here in case one of the experts here has any of the documents that may help me out! Thanks!
  21. MAYTAG TOP LOAD WASHER - MODEL MAV551EEWW I’ve got a Maytag Top Load Washer - Model No. MAV551EEWW - and I’ve recently had to replace the Drain Pump when it became noisey. Before concluding that I needed a new Drain Pump, I had taken the washer almost completely apart (removed wiring connections from control board, removed ground wire screws, removed drive motor, removed drive belt, and finally removed drain hoses/pump) - after receiving the new Drain Pump and installing it, I’ve got everything all but put back together....The ONLY thing I’ve now run into is I cannot remember where all the ground wires either screw/mount onto the frame!! Help!!! There are a total of either four or five ground wire connections - two are located by the drive motor; one connects to the frame of the washer cabinet, the he other connects to the mounting plate for the motor - then the other two or three grounds are up top by the control panel/power cord wiring/front panel/lid switch. Please help me figure it out - I know it’s a grounding issue because I’ve tripped our breaker three times for the outlets/lights in our laundry room upon trying to plug the washer in to test the new pump!
  22. Error Codes after using Diagnostic Setting: F9E1 - drain pump system problem - long drain F0E2 - Over Suds Detected This issue has been on/off over the last few weeks – and we were able to deal with it until now. Basically what happens, is the load starts washing and then it just stops when it gets to “spin”. Sometimes it just shows the red “lid lock” light only. When I cancel it and look inside, either the clothes are pretty wet but no sitting water (i.e. it drained but didn’t spin) or there’s a ton of water still there (didn’t drain or spin). We’ve been able to cancel the cycle – manually move it to the “drain and spin” setting and it would normally work at that point to finish off the load. We use high efficiency detergent and I took the drain apart and looked for anything blocking it – found nothing. The drum does freely turn so it can spin as it does occasionally work as well. All that said, now it makes a weird buzzing sound when you try to choose anything with the dial (attached recording). Please help! TL;DR – Washer begins the wash – then doesn’t spin or drain. Error codes F9E1 and F0E2
  23. LG WM3900H*A Washer Service Manual and Bulletins View File Service Manual and related bulletins for WM3900HBA.ABLEUUS Service manual PUB MFL68588942 WIFI connection fail through ThinQ aplication Bulletin PUB DFZ201900148-01 When replacing the detergent box for water remaining in the dispenser Bulletin PUB DFZ201900119-01 Guide to IE Errors Caused by the Siphon Effect Bulletin PUB DFZ201900167-04 Applying Tape to PCB Covers when they come off Bulletin PUB DFZ202000123-0 Submitter Cowboy Mike Submitted 10/01/2020 Category Appliance Repair Manual Pot Luck Supper  
  24. Version 1.0.0

    283 downloads

    Service Manual and related bulletins for WM3900HBA.ABLEUUS Service manual PUB MFL68588942 WIFI connection fail through ThinQ aplication Bulletin PUB DFZ201900148-01 When replacing the detergent box for water remaining in the dispenser Bulletin PUB DFZ201900119-01 Guide to IE Errors Caused by the Siphon Effect Bulletin PUB DFZ201900167-04 Applying Tape to PCB Covers when they come off Bulletin PUB DFZ202000123-0
  25. Manufacturer: Electrolux Type of Appliance: Washer Model Number: Eifls60jiw1 Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes Drum spinning and banging Service manual needed thanks
×
×
  • Create New...