FAQs | Repair Videos | Academy | Newsletter | Contact
Search the Community
Showing results for tags 'lg fridge'.
Found 2 results
-
It's a one-year-old refrigerator, it's not cooling enough, there was an error code CL E, per these codes show a leak in the evaporator coil. I set the refrigerator temperature at 42 & freezer at 5, now no error code but the compressor is shutting off & restarts after some time. There is no freezing in the freezer compartment. I open the panel over the control board LED was blinking 6 times and paused and repeat the same pattern again and again and the compressor shuts off and start again. I google and found multiple reasons the compressor is too hot, bad capacitor, bad PCB, Restriction & Bad compressor. There is no restriction as the condenser is neat and clean, and the suction pressure is 7 psi (600A refrigerant) I think no restrictions in lines, and there is no capacitor. The compressor is taking 2.2 amps alone. Please help me to take the right troubleshooting. Thanks.
-
LTC22350SS /00 Fridge Evaporator Fan not working. This is a upper freezer and lower fridge unit. So the fan in the freezer does not work and I replaced it with a new one. It still did not work. Also the light in the fridge does not work. After replacing the evaporator motor and it not working I noticed a reset button on the Main PCB board located on the back of the Fridge. I pushed the reset button and the evaporator fan came on and the light in the fridge came on. Everything was working fine again. That lasted for about 4 to 5 minutes and it tripped the reset on the PCB again. Every time I reset it it would run properly for about the same amount of time and stop working again. So I ordered a new PCB board and put it in and it is still doing the same thing. Any ideas on how to fix the problem? Thanks for your help.
