Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      1  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

furnace part needed Carrier Weathermaker 8000


BrntToast

Recommended Posts

not sure if that is correct model number, have a few other numbers

Carrier 58WAV091-14

J9409

36T01B3 42185

L170-40FHH127A176

one of those should be a part number i wrote down off the part last year, its what i think to be a thermal fuse basically dead center of the unit

friend called in a panic and asked if i'd look cause his pipes were about to freeze and he had no money(but he had a fridge full of beer) :P  so i went and found said defective part and bypassed it on his promiss to buy/replace ASAP, well its winter again and he wants to know where to buy it online

btw... what would cause this part to fail

 

Link to comment
Share on other sites

  • Replies 2
  • Created
  • Last Reply

Your limit switch opens up at  170F  (L170-40FHH127A176)  You can pull out the old one and see how long it is (ie. 3" or 7") and  use a generic that opens up at 170F. 

You can browse through all the results off of this page that may help out:

http://furnaceparts.com/eshop/10Browse.asp

As for why it went bad, several options would be:

1. sheer age due beign heated and cooled so many times over the years

2. Actual over temp situation that damaged the device

3. Actual over temp situation and device designed to be a one shot device

Hope this helps some.

1*

Link to comment
Share on other sites

  • 1 month later...

Apparently ya'll drank all the beer,  which was probably cooling the house down too much anyway and ya'll forgot about replacing the jumper wire with a fuse. Now! a year later he wants a real fuse? How much beer is he going to to store up this time?

 Put the next larger fuse available back in there.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...