Jump to content
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Honeywell Electronic Aquastat Control


Mr. Lee Fix

Recommended Posts

Just finished installing a new Weil Mclane oil fired hot water boiler which came with a Honeywell Electronic Aquastat Control #L7224/L7248.  Boiler temp reaches 180*F for the baseboard heat, however the domestic hot water seems to fire the boiler everytime you open the faucet and it fires often, with seemingly a 10*F threshold for firing.  This appears to be the default setting.  I don't have, nor did I get any info for instituting a change for increasing the difference in water temp firing (25*F or so would be fine).

The boiler is a WTGO-4 with a tankless hot water coil.  I know that currently I have immediate recovery, but this is too small a differnce for me and it results in near continuous firing when it's being used for domestic water.  Does anyone know the procedure, or know where I can find the directions.  I couldn't find squat on the Honeywell site.  I'm not a technician, but I can do this stuff without a problem (once I know how).  Thanks.

Link to comment
Share on other sites

  • Replies 2
  • Created
  • Last Reply

Thank you.  I had just found a small pamphlet on the Aquastat which is helpful, however your info should do the trick.  It will need to wait a little however as it is now time to do the rear disc brake rotors, pads, grease, etc.  Thank you very much.

An offering for the Gods of Brewology will be forthcoming.  Domo Arigato,  Mr. Roboto!

Chow!  (It is Superfeast Sunday)

Mr. Lee Fix

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...