Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

detergent dispensing pedestals


denrayr

Recommended Posts

  • Replies 7
  • Created
  • Last Reply

im actually glad to see these, people are spending a lot of money on laundry equipment. It will make good job security for us techs in the future. people will be more likely to fix, rather than throw away, a washer they have invested $1800 in to.

Link to comment
Share on other sites

[user=15157]telefunkenu47[/user] wrote:

and best of all...ITS A GE!

GE® imagination at work attachment.php?id=2760

Link to comment
Share on other sites

  • 1 month later...

[user=32835]mark mac[/user] wrote:

GE = GOOD ENOUGH, ALREaDY HAD THE PLEASURE OF WORKIN ON 2 OF THESE GEMS, HAD TO CALL G.E FOR INFO.

What do you suppose is going to be the issues we're going to see on these things? 

I suspect we'll run into a lot of "glop" buildup, particularly if they have liquid softener.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...