Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Bosch WFMC 3200 Front Load Washer (WFMC3200UC/01)


Recommended Posts

  • Replies 11
  • Created
  • Last Reply

Top Posters In This Topic

  • RegUS_PatOff

    5

  • paltoii

    3

  • rickar

    1

  • islamorada

    1

PM your email address ..

 

manual sent

Link to comment
Share on other sites

  • 8 months later...

Hi, I'm looking to replace a door gasket on our Bosch WFMC3200UC , it has a rip in it and is starting to leak. i purchased a gasket kit (door gasket, gasket holder and front/rear gasket clamps) the only instructions that came with it was a service bulletin which doesn't say much. if you can send me a service manual for this washer that would be great. i was planning on trying it this weekend.

thanks again

Link to comment
Share on other sites

Thanks for the service manual!

After looking at it, I'm almost ready to go but i just have question regarding the inner seal spring. I looked at the service manual but it doesn't mention anything about the removal of that one. I'm assuming it wraps around the drum or something. If any of you can suggest any tips regarding this inner seal spring before i start that would be greatly appreciated.

Thanks again!

Link to comment
Share on other sites

  • 1 month later...
  • 5 weeks later...
  • 3 months later...

Hi,

Could I get the link to the manual as well ?

I replaced the gasket on my washer but one of the clips inside of the door ended up falling into the door when I removed the hinge screws. Is there anyway to open up the door ?? Is there anything in the manual regarding this ?

Thanks,

Kim

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...