Jump to content
LIMITED TIME OFFER: Use code 10YEARS10 to get 10% off your Appliantology membership. Click here for more ×
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

18 yr old Carrier Tech 2000 condenser # 38TH024


srdu7993

Recommended Posts

We woke up this morning to find the condenser running but no air coming out of the ducts.  Turned the thermostat (programmable) off but still it ran.  Finally pulled the breaker.  Bad switch?  Time for a new one?  The air handler was done in 2001 and is still good.

Link to comment
Share on other sites

  • Replies 1
  • Created
  • Last Reply

Likely a stuck contactor. With all power turned off remove the access panel on the condensing unit & take a look. Here is what you are lookin for  60025 and I'll throw in a picture at no extra cost. The contact (yours may have 2) should spring back up, if does not push in see if the contacts are welded/burned together.

post-11934-129045110228_thumb.jpg

post-11934-129045110568_thumb.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...