Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Whirlpool Natural Gas water heater Model #: FG1F4034T3NOV


pigsooie96

Recommended Posts

pigsooie96

I have two water heaters that ran fine for a couple of years. Then one day, when the "good" water heater (Hotpoint Model#: HG40t1A) would kick on, it would blow the Whirlpool water heater completely out.  And not just the pilot light.  The Whirlpool could be on "full burn" and when the Hotpoint would kick on, the whirlpool would blow out.

The heaters are set up side-by-side and run off of one gas line.  The gas line comes down and branches off to each heater.  The flues tie together and then go out of the house.  There is a separate hot and cold water line for each heater.  I have checked the flues and all is clear.  I lit a match over each one and the smoke from the match seemed to be getting sucked up fine over each heater.

Any suggestions as to what the problem might be?

Thanks-

 

Link to comment
Share on other sites

  • Replies 1
  • Created
  • Last Reply

I'm no expert, but I would think it's a partially blocked flue..

bird's nest, etc ..

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...