Jump to content
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Vulcan convection oven model# SG-2-5 or S MP


Recommended Posts

  • Replies 7
  • Created
  • Last Reply

Top Posters In This Topic

  • SANTA

    5

  • RegUS_PatOff

    3

Top Posters In This Topic

Thanks much! There will be something extra in your stocking this christmas

Link to comment
Share on other sites

How do you test the solenoids on this oven? The oven pilot lights are burning. The thermostat and load switch test ok. The door switches are ok. The fan is ok. The burners will not light.

Link to comment
Share on other sites

Is the Oven Indicator Light ON ?

Did you do the tests on PDF page 19 ?

Link to comment
Share on other sites

Yes I did the tests. The oven indicator light is on and voltage checks on the load control were ok

Link to comment
Share on other sites

Has this oven worked at the present location ?

and is there 120v at the Solenoid ?

yes.. sounds like it bad ...

 

or the Coil on the Valve is bad ...

http://www.refrigeratorparts.com/store/GAS-01005.html

http://www.fixitshop.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=Applianceparts&Product_Code=GAS-01005

http://www.instawares.com/158-1005-robertshaw-f-j.158-1005.0.7.htm

 

 

Link to comment
Share on other sites

 There is 120 vac at both coils. I can hear the rear coil energize when the load control and thermostat are turned on. The front coil is energized with just the master switch on and thermostat and load control off. That doesn't seem right.

Link to comment
Share on other sites


×
×
  • Create New...