Jump to content
LIMITED TIME OFFER: Use code 10YEARS10 to get 10% off your Appliantology membership. Click here for more ×
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Carrier Split System A/C


dourobob

Recommended Posts

Hi folks

Headed to our guest cabin to turn on the A/C unit for the first time this summer and "it doesn't want to turn on" no matter how much I say I love it.:D

The unit is 6 years old.  Professional installation in June 2003.  Has been operating well the past five summers.

So far today I have:

  • changed batteries in the remote
  • reset the remote
  • checked the main electrical panel and turned the breaker off and on again
  • turned off the "fused disconnect" and turned it back on
  • switched from REMOTE to EMERG

Still no joy.

I am not certain that the inside unit is getting power as no red or green lights have come on and there is no beep when the remote send a signal.

It would be most appreciated if someone could walk me through where to check to be sure there is power at the indoor unit (I have a multi-meter).  Also, is there something I should check, other than the ON/OFF switch, in the "fused disconnect" box outside.

Is there something else I need to check?

I hope this is something simple and I want to cover as much as possible before I have to call in the service folks.

Thanks for your time

Bob

Link to comment
Share on other sites

  • Replies 1
  • Created
  • Last Reply

Was able to confirm today there is power at the fused disconnect box outside but still no joy when trying to start the unit with the remote or in emerg position.

Still waiting for suggestions.

Thanks

Bob.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...