Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Wascomat W74 Front Loader Service Manual


avdelgado

Recommended Posts

I have a W74 that I have taken out of service due to failed bearings.  Before I jump into this job that I will probably regret I would like to make sure that I have all the required pullers.  Thanks in advance.

Link to comment
Share on other sites

  • 5 months later...
  • Replies 1
  • Created
  • Last Reply

Top Posters In This Topic

  • Adirondack Bob

    1

  • avdelgado

    1

Popular Days

Top Posters In This Topic

Hello Andy, I have done quite a few of these. Wascomat has a complete tool kit with all the pullers that can be rented. Pretty sure its 100.00 dollars for 15 days. It also comes with detailed instructions. With the W74 you can find pullers at an auto parts store that will work. Also, we use 18 inch long car tailpipes to drive the bearings and seals back on. Just take the bearing and seals to auto store to match diameter.

Link to comment
Share on other sites


×
×
  • Create New...