Jump to content
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

GE Front Load Washer


josh_am1

Recommended Posts

Does any one have a tech sheet on this washer or know how to put into diagnostic mode? Any help would be appreciated!

Link to comment
Share on other sites

  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

  • josh_am1

    4

  • Samurai Appliance Repair Man

    1

  • grey shrek

    1

Popular Days

Top Posters In This Topic

I have never used it , but : unplug for 30 seconds , reconnect and within 30 seconds 1-press signal button  2-press delay start button  3-press signal button  4-press delay start button (door will lock and display t01.No idea how to advance .  To exit press signal , press delay , press signal , press delay. unit will leave test mode in two hours - DO NOT unplug washer , it will remain locked. good luck and lets hope someone with better knowledge jumps in..

Link to comment
Share on other sites

Thanks for the reply. Gives me a little bit of insight to move ahead but anyone with more info please chime in!

Link to comment
Share on other sites

  • Team Samurai

I PMed you the download link for the mini-manual.

Link to comment
Share on other sites

[user=1]Samurai Appliance Repair Man[/user] wrote:

I PMed you the download link for the mini-manual.

Thank You! Very Much Appreciated

Link to comment
Share on other sites


×
×
  • Create New...