Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Dacor vent hood mod. # IVS2, 10/02/2002/ ser.# A02400678


srdu7993

Recommended Posts

My seven year old Dacor vent hood is not working.  Lightwise any way.  The vs fans are fine but the lights, (yes I put in new bulbs), do not work.  Any ideas?

 

steve

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • srdu7993

    2

  • denrayr

    1

  • RegUS_PatOff

    1

Top Posters In This Topic

Dacor IVS Parts Catalog link PM'd

may be bad Lamp Dimmer ?

this one ?:

looks like regular lamp dimmer (w/built-in filter)

(don't change bulb with power-ON)

Dacor Lamp Dimmer 62753

click on picture

00465798.jpg

Link to comment
Share on other sites

most of these hoods have a step down transformer and a fuse. check for a blown fuse at the transformer. a lot of times when the bulb goes you get a flash at the bulb and it blows the fuse.

Link to comment
Share on other sites

I concur.  Tested the lamps and they are fine.  Tested the lamp holders and they seem to be good as well.  Doesn't seem to be any fuse or transformer to mess with. 

What would be the best way to change out the dimmer?  I see it has a cover.  Does the whole assembly have to come out?

Link to comment
Share on other sites


×
×
  • Create New...