The days of Monkey Boy Service Calls are over...

Click here to check out our fun short course and learn how to get the most out of Appliantology.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

Stay connected with us...

Samurai on Facebook - become a fan today! Sign up for our free newsletter and keep up with all things Appliantology. Subscribe to our YouTube channel for lots of appliance repair tips and help! Follow the Samurai on Twitter and get timely morsels of Appliantological Wisdom! Subscribe to our MST Radio podcast to learn secrets of the trade.
  • Announcements

    • Samurai Appliance Repair Man

      [Webinar] Basic Refrigeration Sealed System Thermodynamics   09/21/2017

      See this calendar event for details:                   
    • Samurai Appliance Repair Man

      Webinar Recordings Index Page   09/21/2017

      One of the benefits of your Professional Appliantologist membership is that you can attend the regular, live training webinars and you have access to the recordings as well. So if you can't make it to the live webinar, catch the recording at your convenience. The webinar recordings are conveniently listed for you on the Webinar Recordings Index Page.   
Guest

Bosch Nexxt 500 Plus WFMC5301UC Service Manual or Diagnostic Info Request

Recommended Posts

Guest   
Guest

Any help or pointers with regard to a service manual or error code list would be helpful. Unit is not spinning out and leaving clothes wet. Not a balance problem. Originally seemed to occur on cold wash cycle, but has happened on warm as well. I know how to enter manual/test mode and run the spin cycle manually, and when doing so I see an E:20, but I have no reference for what that means. Unit is still under warranty so I will have someone come out, but would sure like to have the info for future use. Thanks in advance.

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

RegUS_PatOff   
RegUS_PatOff

I don't have a manual for that model,

but for the WFMC3200 / WFMC6400:

E:20

Spinning aborted due to unbalanced load

Unbalanced load or faulty wire harness

Share this post


Link to post
Share on other sites
Guest   
Guest

Thanks for the reply - much appreciated. I'll watch for the out of balance condition. I'm not sure that is the problem (or that it isn't :)

It wouldn't surprise me if the error codes are mostly common between these similar units. As I've not heard or felt any signs of serious imbalance from the other room I'm not sure how to prove this one way or the other - short of baby sitting every load until it happens again. From what I can recall, the times where it has not spun out have been with smaller loads, so unbalance may fit. I'll report back if I can provide a definitive answer. Thanks again.

Share this post


Link to post
Share on other sites
trying_to_fix_it   
trying_to_fix_it

Do you have a manual for WFNC5301UC Nexxt 500. My washer is not spinning fast enough after tub, pump, shocks, and board change. I was told that you can force max spin via the service diag mode?

Share this post


Link to post
Share on other sites
RegUS_PatOff   
RegUS_PatOff

may be similar

WFMC3200 / WFMC6400

link PM'd

Share this post


Link to post
Share on other sites