Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Appliance Maintence Program for Customers


ReliableApp

Recommended Posts

I have this customer.  They would like me to put together a maintaince program for mid to high range appliances.  Duets, Monogram Refrigerator, GE Dual fuel range, GE dishwasher.  There's 15 units in all with these appliances in them.  Any insight on a maintence program would be greatly appreciated.  Thank you!!!!

Link to comment
Share on other sites

  • Replies 6
  • Created
  • Last Reply

I'm no expert, but maybe just a % discount on each call ... (and parts)

20% ??    more ??

depends on location ... and priority ..

 

OR are you talking preventive maintenance ?

 

Link to comment
Share on other sites

I am talking preventative maintence.  Like a program he wants me to lay something out.  I'm a little un seasoned and have no idea how to propose something like this.  Any suggetions are greatly appreciated.  Channing

Link to comment
Share on other sites

Dryer-check op. temp, lint build up (clean if necessary)

washer- check for proper operation, fill hoses for corrosion, leaks

refrig-check op. temp in both sides, i/m water line for leaks, corrosion

etc.

a lot of this isn't necessary but if he wants to pay you for it, go for it.

Link to comment
Share on other sites

but if he wants a flat yearly amount for all preventive maintenance ...

Link to comment
Share on other sites

yeah i know, just giving the op a place to start. i would list what you would check for each appliance, as well as a discounted price for any repairs that are found. add up how much time you would have to check all appliances in 1 unit, then multiply by 15

Link to comment
Share on other sites

Thanks for your suggestions and insight.  It is greatly appreciated.  I put together a brochure in publisher that I will send to you for further suggestions if you have the time. Its was kind a quick put together since I needed to get them something.  Thanks, Channing...

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...