Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

maytag gemini electric range (8119P388-60)


argieshark

Recommended Posts

maytag gemini electric range (8119P388-60)

need this manual to diagnose a burner issue.  the larger burner (front right) has the capacity to be three different size burners based on two switch settings. 

My issue is the center section of the front right heating element is not powering up.  the outer zones are.  based on this peculiarity, i suspect i either need to replace an upstream circuit part or the whole element. 

replacing the whole element appears to be very easy.  part number on the underside of the ceramic element says:  Ceramaspeed RoHs 300P8-L8606R 7406P494-60.

Thanks,

Argie

Link to comment
Share on other sites

  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

  • RegUS_PatOff

    2

  • argieshark

    2

  • appl.tech.29501

    1

Top Posters In This Topic

If you change the element make sure you check the wire locations and I.d.'s....the locations may change from the original element so if you just plug the wires up as the old one is you may be buying another.

Link to comment
Share on other sites


×
×
  • Create New...