Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

PLRU1777DSO Frigidaire


Volkemon

Recommended Posts

Greetings all!

The General Manager where I work just called with a problem- his personal frige is warm!

I am unfamiliar with this particular unit, so any service manuals or tech sheets would be welcome. I am going to go by there tonight after work, and would like any extra knowledge that is out there.

Domo Arigato!

 

 

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • Volkemon

    3

  • RegUS_PatOff

    1

Popular Days

Top Posters In This Topic

Ah... back home, GM's frige has gone from 66* to 43 in 1 1/2 hrs...and it is jam packed with stuff, most spoiling/spoiled.

:notworthy::notworthy::notworthy::notworthy:

@ RegUS_PatOff- Thanks again. I was rushed, late, out of the office and had only time to type the quick thanks. The parts list was valuable for giving me a rough idea of what I was looking at, and the GM was impressed. The wiring diagram told me that it was a simple system, and no need to sweat the control board, temp sensors, etc... there are none. Nice ol' manual defrost timer- easy to test, handy to shut down the compressor and test the defrost heater.

Turned out to be low on freon. I had everything with me, put a few ounces in until it stabilized at 12psi on the low side. This is my 'by guess and by gosh' for friges, and seems to work well. Any input is welcome on that! Saw a few soldered joints that had corrosion on them, may come back and clean well and epoxy. We will see how long the charge holds...... 

Thanks again. $5 going to the samurai beer fund, do you have a preferred reward for helping a Warrior Appliantologist? PM me if so.

THANKS AGAIN!!:bananadance:

"PLRU1777DSO / PLRU1777DS0 "  The model # was givin to me from the GM, as he got it read from his wife over the phone. I had no way to verify until I was there. Crisis mode...

 

Link to comment
Share on other sites


×
×
  • Create New...