Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

need wolf gas range service manual for R366


codehorse

Recommended Posts

One of the burners is clicking and is missing a little metal part that goes around the (igniter?). I need the manual to even know what to call the part to order.

Thanks,

Tim

Link to comment
Share on other sites

  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • codehorse

    2

  • RegUS_PatOff

    1

Popular Days

Top Posters In This Topic

may be called an Electrode 806483 # 11 PDF page 20 & 21 Parts Manual

and Service Manual links PM'd

Link to comment
Share on other sites

Great! Thanks for the manuals. I cleaned the electrode and it seems to be working better now.

There is a little metal clip around 4 out of 6 of the electrodes, but perhaps it does not matter.

Thanks again.

Link to comment
Share on other sites


×
×
  • Create New...