Jump to content
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Request manual Frigidaire washer ATF7000EG0


dekostop

Recommended Posts

request service manual for above washer.

when spin is selected the machine drains...after a few minutes the tub makes a few revolutions to the left and then to the right.  at 6 min time left the machine shuts down and beeps. no error code displayed. any input besides the manual would be appreciated.

 

thanks in advance

 

tim

 

Link to comment
Share on other sites

  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

  • dekostop

    3

  • RegUS_PatOff

    2

Top Posters In This Topic

Is the Door locked ?

Is the Door really locked ?

While it's Agitating during a Wash cycle, un-plug power to the machine.

Can you then immediately open the Door, OR only after a few minutes ?

ATF7000EG0 Tech Data & Wiring Diagram

ATF7000EG0 Parts Lists & Diagrams

Affinity Washer Manual

Link to comment
Share on other sites

door is locked and locked door indicator is on..........shows error code 43 in diagnostic.  i am going to replace the door lock asm...we'll see what happens.

 

thanks for the quick reply.

 

Link to comment
Share on other sites

[user=3641]RegUS_PatOff[/user] wrote:

While it's Agitating during a Wash cycle, un-plug power to the machine.

Can you then immediately open the Door, OR only after a few minutes ?

Link to comment
Share on other sites

  • 3 weeks later...

×
×
  • Create New...