Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

service manual for gshl6phxcels ge sxs refrig


kjr232

Recommended Posts

I AM IN NEED OF A SERVICE MANUAL OR ANY TECH BULLETINS FOR A GE REFRIG MODEL GSHL6PHXCELS SXS. I HAVE LOOKED THRU THE AVAIL ONES BUT AM NOT SURE IF ANY ARE AVAIL. THANKS KJR32

Link to comment
Share on other sites

  • Replies 7
  • Created
  • Last Reply

Top Posters In This Topic

  • kjr232

    4

  • Samurai Appliance Repair Man

    3

  • RegUS_PatOff

    1

Top Posters In This Topic

what problem area are you looking for ?

this one may be similar ..

GE GSS Models SxS Refrigerators Service Manual

Link to comment
Share on other sites

THE ELECTRONIC READOUT ON THE FREEZER DOOR IS ERATICALLY SHOWING ALL ZEROS AND THEN THE BUTTONS WONT WORK. IS CCOLING FINE

Link to comment
Share on other sites

  • Team Samurai

Sounds like a loose or oxidized wire harness connector. Disconnect/reconnect all the wires and harnesses going to the control panel. Also, check that harness connector at bottom hinge of the freezer door.

Link to comment
Share on other sites

YES THAT WAS IT. THANK YOU FOR ENLIGHTENING ME WITH YOUR ULTIMATE WISDOM. FOR THAT YOU SHALL RECEIVE A BEER.

Link to comment
Share on other sites

  • Team Samurai

Which was it: bad connection at the board or at the freezer hinge?

Link to comment
Share on other sites

  • Team Samurai

Nice job! :coolblast:

Link to comment
Share on other sites


×
×
  • Create New...